13mm luer lock filter ptfe syringe filter company vwr
Lab Syringe Filters | Chemical Filtration Devices | Spectrum
Get clarification of extremely viscous samples with Spectrum Chemical's selection of lab syringe filters. High quality and cost effective, our stock of nylon syringe filters are designed for sterilization or clarification of aqueous & solvent samples in a wide array of analytical and research applications.
AYN for Food Analysis - VWR International
13 mm PTFE. 0.45 µm. Nonsterile. VWR® Syringe Filters ... Each filter has a female Luer-lock inlet and a male slip Luer outlet. Note:
FILTSTAR Syringe Filters - Global Scientific
FILTSTARTM syringe filters are available with many different membrane including Nylon, PTFE, Hydrophilic PTFE, PES, PVDF, MCE, CA, GF, PP, in both sterile and non-sterile varieties, and with or without pre-filters. They are made of extractable free virgin polypropylene housings standard inlet (female luer lock) and outlet (male luer) connections unless otherwise stated. Options include
PTFE Membrane Syringe Filters Type- SYTF
PTFE Membrane Syringe Filters Type- SYTF. mdi SYTF with PTFE membrane and polypropylene construction are suitable even for filtration of highly aggressive solvents.. $0.00; Ex Tax: $0.00
Syringe filters Millex® Hydrophobic polytetrafluoroethylene
Syringe adaptor filters Syringe filters Millex® Hydrophobic polytetrafluoroethylene (PTFE) Syringe filters Millex ® Hydrophobic polytetrafluoroethylene (PTFE), 0,45 µm, 13 mm, Millex ® -FH
Syringe Filter - Nylon Syringe Filters Manufacturer from
microsep syringe filters combine premeium quality and economy are designed for quick ,effecient filtration of samples upto 100ml volume. MICROSEP FILTERS ARE PRODUCED FROM POLYPROPYLENE WITH STANDARD INLET(FEMALE LUER LOCK)AND OUTLET(MALE LUER)CONNECTIONS AVAILAIBLE IN BOTH STRILE AND NON STRILE.
Re-usable Polycarbonate Syringe Filter Holders, 13 mm | Sartorius
The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Regenerated Cellulose Membrane Filters / Type 18406, 0.45 µm pore size, 13 mm diameter, 100 pieces per pack
Syringe Filter(PTFE) - Quzhou Lab Technology Co.,Ltd
Syringe Filter(PTFE) A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so. The use of a needle is optional; where desired it may be fitted to the end of the syringe
PTFE Membrane Syringe Filters with pre-filter Type- SYTG
PTFE Membrane Syringe Filters with pre-filter Type- SYTG. mdi SYTG with PTFE membrane and multilayered binder free borosilicate microglassfiber pre-filter provide absolute retention of very difficult to filter colloidal contaminants. These are specially used to filter highly turbid (hazy) solutions. $0.00; Ex Tax: $0.00
Thermo Scientific™ Target2™ PTFE Syringe Filters, 0.45μm
Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Target2 Syringe Filters are an ideal choice for general purpose laboratory use. Robust and reliable, they deliver excellent performance at an attractive price. Outstanding Performance
Syringe filters, Acrodisc®, PTFE | VWR
Nowhere in the information did it mention the diameter of the Luer. When I opened the carton I discovered that the Luer was half the diameter of the injection port. I have been using this type of filter for over 25 years and have never come across anything other than a standard Luer or Luer-lock fitting.
Syringe Filters | VWR
Description: 13 mm diameter with mini-tip outlet is well suited for filtration into very small sample bottles.
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Ethylene Oxide, Female Luer Lock, Needle (38 × 1.7 mm), Pack Size 50 Added to Shopping Cart Minisart ® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.
VWR® Syringe Filters | VWR
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common
China Syringe Filters With Prefilter Manufacturers - Syringe
13mm 0.45um Disposable PTFE Syringe Filter With Prefilter For Lab Use Introduction PTFE membrane are hydrophobic in nature and are effective barriers to microbes and particulate matter. The high titer reduction and water intrusion pressure allow the membrane to repel high surface tension liquids while venting gases.