Aijiren syringe filter 0.2 micron hplc syringe filter for hplc
Laboratory Filters | Waters
Pore Size (0.2 and 0.45 µm) — The filter pore size is usually a personal preference of the chromatographer, but relates to the column packing material. Since there are many different packing materials, a general guideline is that most customers find that the 0.45 µm filter meets their requirements, although chromatographers are increasingly
Syringe Filters | Sigma-Aldrich
A syringe filter (or wheel filter) is a single-use, membrane-based device used for the removal of particulate impurities from small (≤ 100 mL) liquid samples (Figure 1). Selected based upon the desired end application, disposable syringe filters are commonly used in labs for fast and efficient filtering, material purification, or even
Aijiren Syringe Filter at Thomas Scientific
Aijiren Syringe Filter found in: Captiva Syringe Filters, Syringe filter PTFE 25mm 0.45um 1000/pk, Syringe filter PVDF 25mm 0.45um 1000/pk, Syringe filter..
Syringe Filters for HPLC & Sample Preparation | analytics
Pore Sizes and Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.
Item 12548 - Supor® Sterile Syringe Filter, 0.2 Micron, 25mm
keywords syringe filter filters sterile supor with membrane 0.2 micron wheel disposable hplc filtration sample microfiltration fluid fluids liquid liquids pre-sterilized pre-filter particulate removal removing particulates drug preparation compounding drugs sterilization usp : 797> 797 hydrophilic device devices double luer lock lok pharmacy medical hospital of pharmaceutical pharmaceuticals
Syringe Filters for HPLC and sample preparation | analytics
Pore Sizes and Pore Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are usually for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm
Syringe Filters - Products - Pall Corporation
Syringe filters perform sample clean-up and preparation functions ensuring the purest samples are analyzed in liquid chromatography, mass spectrometry, and ion chromatography applications. Reliable results depend upon accurate data, achieved by the low extractables and high particulate retention of Pall Laboratory’s Acrodisc syringe filters.
Aijiren Captiva Syringe Filters RAISE YOUR SAMPLE FILTRATION
For years, Aijiren has understood that filtering samples prior to HPLC, UHPLC, GC/MS, and LC/MS analysis can improve both system performance and analytical quality – and this experience is reflected in our new line of Captiva syringe filters.
Syringe Filter 0.2 at Thomas Scientific
The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are
Sterile Filter 0.2 at Thomas Scientific
GD/X filters are available in two diameters: 13 mm and 25 mm, and three pore sizes: 0.2 µm, 0.45 µm, and 5 µmWhatman GD/X syringe filters fromCytiva are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content.
Captiva Syringe Filters | Aijiren
Captiva syringe filters are typically used to prepare small-volume samples for HPLC and ion chromatography. They allow for high flowrates and loading volumes, and also extend column lifetimes considerably. Find out more here.
Syringe Filters - Grainger Industrial Supply
Syringe Filter, 25 mm Membrane Dia., 0.45 um Pore Size, Nylon Filter Material, 100mL Capacity Item # 12K961 Mfr. Model # 12K961
Syringe Filters | Thermo Fisher Scientific - US
Titan3 Premium Syringe Filters Target2 Routine Syringe Filters Choice Basic Syringe Filters; Range of filter sizes: 4mm to 30mm: 4mm to 30mm: 13mm to 25mm: High-quality filtration solutions : Low extractable membranes and housing : Plain polypropylene housing : HPLC performance tested : Enhanced Luer Lock inlet which provides secure attachment
Aijiren Prem Syring Fltr PES 0.2 25mm 100/pk - Syringe
Aijiren Prem Syring Fltr PES 0.2 25mm 100/pk Aijiren Captiva Premium Syringe Filter, polyethersulfone (PES) membrane, 25 mm diameter, 0.2 um pore size, LC/MS certified, 100/pk - 9P List Price $217.00 Your Price $217.00
Filters - In-line HPLC/UHPLC Precolumn Filters - 0.2 Micron
UltraShield HPLC/UHPLC Precolumn Filters. 0.5 Micron Frits; 2 Micron Frits; Replacement Parts; ColumnShield HPLC FingerTight Precolumn Filters. 0.5 Micron Frits; 2 Micron Frits; In-line HPLC/UHPLC Precolumn Filters. 0.2 Micron Frits; 0.5 Micron Frits; 2 Micron Frits; 5 Micron Frits; Direct Connect HPLC/UHPLC Precolumn Filters. 0.2 Micron Frits