Capacity Reagent Bottle Uses MBL

Cassette capacity: Max. 300 cassettes: Retort reagent volume: Max. 4.8 L (up to fill level of third sensor, without specimen filling) Paraffin container capacity: 3 paraffin baths: 4.9 L each 1 pre-melt paraffin station: 5.0 L : System bottles: 9 (in the reagent cabinet) RTU-bottles: 6 (in the drawer) Condensate bottle: 1

Throughput of 240 test/hour. Clinical Chemistry ad Turbidimetry dedicated reagents. 30 refrigerated positions by 20 and 50 mL reagents bottles. Refrigeration system with switch independent from analyzer. 3 positions without refrigeration for sample and reagent racks. 24 samples per rack. Maximum capacity of 72 samples.

Cassette capacity: Max. 300 cassettes Retort reagent volume: Max. 4.8 L (up to fill level of third sensor, without specimen filling) Paraffin container capacity: 3 paraffin baths: 4.9 L each 1 pre-melt paraffin station: 5.0 L System bottles: 9 (in the reagent cabinet) RTU-bottles: 6 (in the drawer) Condensate bottle: 1 Bottle volume: 3.8 and 5.0 L

MBL Reagent Bottles, Amber, Narrow Neck. - Amber soda-lime glass bottles with ground neck. - UV absorbent up to 500nm. - Ideal for the storage of light sensitive materials. - Supplied with polyethylene stoppers.

1. INTENDED USE The human MBL (Lectin assay) ELISA kit is to be used for the in vitro quantitative determination of human MBL in serum, plasma and cell culture supernatant samples. This kit is intended for laboratory research use only and is not for use in diagnostic or therapeutic procedures.

Aldrich® reagent bottle capacity 60 mL, Joint: ST/NS 14/20, amber bottle; Synonyms: bottle reagent,reagent bottles; find Sigma-Aldrich-Z530565 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

Jul 16, 2015 · General use, care, and how to open a stuck stopper. Many of our kits include reagent bottles for steeping and storing bitters. This type of bottle has been used to store chemicals for at least 150 years, though the idea for the ground glass stopper dates back to the late 1700s.

• Maximum block capacity per retort 360 300 300 7.6 L Tissue-Tek Xpress processing reagent 5 L formalin (2 bottles), 5 L alcohol (6 bottles), 5 L xylene

Do not use reagent bottles other than the specified. To load reagent bottles, insert the bottle into the bottle holder until the bottom of the bottle contacts the groove of the holder. To remove the reagent bottles, grab the bottle and pull it upward to remove it from the bottle holder. 2.8 Installing/Removing Cuvettes

20 reagent bottle positions (1,000 mL) All reagents circulate constantly during processing (DakoRMS) 20 membrane pumps (five pumps for xylene, 15 pumps for other reagents) Each pump uses one reagent bottle and can go to one reagent station or two dip tank compartments Reagent capacity Dako CoverStainer reagents (Dako Hematoxylins, Dako Eosins,

MBL Reagent Bottles, Amber, Narrow Neck - Complies with ISO 4796-2 - Amber soda-lime glass bottles with ground neck - UV absorbent up to 500nm - Ideal for the storage of light sensitive materials - Supplied with polyethylene

AC-038 4.5 liter Space- Saver Container with lid (5 liter capacity) AC-039 Dispensing Spigot for Space-Saver Container AC-043 500 mL Reagent Bottle with lid (empty) AC-048 4.5 liter Reagent Bottle Assembly with pickup tube (5 liter capacity) SS-135/149A Rinse Concentrate, 135 mL will dilute to 4.6 liters Reagent A, Rinse

Reagent bottles are used to store reactive materials (such as reagents, colloidials, acids, sera, and similar agents). Reagents have wide mouths, and have glass lids that 'secure' by a conncention of ground glass on ground glass. The use of glass lids prevents content reactions that might happen with plastic or rubber lids.

Do not use reagent bottles other than the specified. To load reagent bottles, insert the bottle into the bottle holder until the bottom of the bottle contacts the groove of the holder. To remove the reagent bottles, grab the bottle and pull it upward to remove it from the bottle holder. 2.7 Installing/Removing ISE Components (Optional)

MBL Classic reagent bottles. A staple product of many laboratories, these reagent bottles with colour coded polyethylene stoppers or glass stoppers are manufactured in clear soda-lime glass. Complies with ISO 4796-2. Clear soda-lime glass bottles with ground neck. Customer to choose if supplied with polyethylene stoppers or clear glass stoppers.