Capacity Sampling Reagent Bottle Stored MBL

Sample containers Blood collection tubes, sample cups Reagent compartments R1: 56 bottles (65 bottles maximum*), R2: 36 bottles (56 bottles maximum*) Reagent containers 100-mL, 70-mL, 55-mL, 50-mL, and 20-mL bottles Reaction line Discrete type Reaction cuvettes Hard glass (light-path length: 5 mm) Reaction time Approx. 10 minutes (can be extended)

(4) Mix each reagent by swirling the reagent bottle prior to use. (5) Using a new pipette tip, add 100 μL of conjugate from the blue-labeled bottle to each red-marked mixing well. Discard the tip. (6) Using a new tip, add 100 μL of the control to the first red-marked well.

31 (100 pieces). The caps are placed directly on reagent bottles stored in the refrigerated reagent chamber. The design allows for sampling by the instrument, but prevents evaporation of the reagent. f. Disposable glass culture tubes, 10 x 75 mm. Cardinal Health cat. no. T -2. Specimens are transferred into these tubes prior to instrument

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

reagent-sample-carrier or a reagent-carrier-sample pat-tern which depended on the magnitude oftfandwas of precisely reproducible volumes. The first pattern gave maximumsensitivity, whilethe secondcouldbeusedfor anautomaticin-line dilution typeofprocedure,..inwhich only the highly dispersed portion of the sample zone mixedwithreagent.Fortf=5"0s

Mannose Binding Lectin (MBL) is a C-type lectin that is an important element in innate immunity. MBL belongs to the collectin family of proteins that consists of a collagenlike domain and a - carbohydrate recognition domain (CRD). Through this, MBL recognizes carbohydrates (e.g. mannose and N -acetylglucosamine) on pathogens.

Reagent Bottle. Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers and are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves.

an unopened bottle was stored inside the can from the original shipment. The bottle appeared to be new; however, closer inspection of a cryptic ink-stamp on the paper label of the outer can re- vealed that it had originally been re- ceived by Purdue’s Chemistry Stores from the manufacturer ten years earlier!

High reagent and sample capacity (88 positions), the highest grade in flexibility Any position can be loaded either with a reagent bottle or a sample tube/pediatric well, (samples, controls or standards). All of them fully accessible to barcode reader.

The surface of the bottle has scale marks. The body of the bottle is translucent, easier to check the substance or fluid level.4.Application.Suitable for liquid, reagent and sample storage. Widely used in various food factory, chemical plant, food stores, classification of packaging applications in various industries.

Navigator 600 Silica Single-stream 1 Safety 4 IM/NAV6S/SS–EN Rev. G 1.3 Symbols – IEC 61010-1:2010 One or more of the following symbols may appear on the equipment labelling:

Reagent bottles, also known as media bottles or graduated bottles, are containers made of glass, plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories and stored in cabinets or on shelves. Some reagent bottles are tinted amber (actinic), brown or red to protect light-sensitive chemical compounds from visible light, ultraviolet and infrared radiation which may alter them; other

After heating transfer to a 500-mL reagent bottle. Tightly seal and cool to room temperature. When cool add 3 mL of reagent water. Mix thoroughly by shaking or rolling for 10 minutes and let it stand for at least two hours. Keep the bottle sealed tightly. 6.6 Alumina—Neutral activity Super I, W200 series (ICN Life Sciences Group, No. 404583).

the reagent tray and place it in the refrigerator. 3. Remove creatinine cassette before placing reagent tray in the refrigerator. NOTE: The creatinine cassette must be stored at room temperature 4. Make sure the sample and reagent container unit cover (SRCU) and main lid cover of the instrument are closed while in sleep mode and during analysis. 5.

The status of the blood culture or urine sample's positivity is the responsibility of the laboratory and must be carried out according to the laboratory's routine criteria. The bacterial pellets must be made from freshly collected urine or after the blood culture bottles have tested positive. 881150 - 2014/03