Certified 0.2 um ptfe membrane filter for hplc phenomenex
Ptfe Membrane 0.2 at Thomas Scientific
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Air Vent Filter
HPLC/GC Approved Syringe Filters - phenomenex.com
Optimized Filtration of Ginger Formulation Pills Using Phenex PTFE Syringe Filters and Kinetex 2.6 μm Biphenyl LC Column Add to My Documents Filter Type: Filter Membrane: Nylon (NY) Internal Diameter (mm): 13.00 Pore Size (µm): 0.2
Hydrophilic PTFE Syringe Filter – Membrane Solutions
MS ® hydrophilic PTFE syringe filters are using special hydrophilic PTFE membrane as the filter medium. This material has a maximal chemical and pH resistance and optically clear when wet with water. Hydrophilic PTFE syringe filter is a versatile filter for aqueous and aggressive organic solvent-based solutions and especially ideal for HPLC
Whatman Syringe Filter Collection - Fisher Sci
In addition to HPLC, syringe filters have a multitude. (use sterile filter and membrane with pore size 0.2 μm) 16. ... 0992730A PTFE 0.2 150
Onyx HPLC Columns Tips for Care and Use
dramatically degrade column life. Filter all samples using a 0.45 μm or 0.2 μm porosity filter prior to injection. Do not overload the column. Matrix Cleanup Utilize sample preparation techniques such as solid phase extraction (Strata-X SPE products) or accessories (Phenex™ Syringe Filters) to minimize the injection of
(PDF) QuEChERS-HPLC method for aflatoxin detection of
The limit of detection (LOD) ranged from 0.2 to 1.2 ng/g and limit of quantitation (LOQ) ranged from 0.3 to 1.5 ng/g. The validated method was successfully applied to a total of 120 samples.
Filtration - phenomenex.belvr.by
ing a membrane filter, clogging of the membrane filter is prevented and sample clean up is optimized. Outlet connection is luer lock. AF0-8515-12 7 100/pk AF0-8515-52 7 500/pk Phenex Syringe Filters Ordering Information 1 Above syringe filters are non-sterile. Housing is made of medical-grade polypropylene (PP), and offer luer lock inlet/slip
UHPLC/HPLC Sample Filtration 2. characteristics of your
beneficial material characteristics, Phenex-RC membranes are broadly recommended as an excellent general purpose/high-performance sample filter for most applications. Ptfe Polytetrafluoroethylene(PTFE) - Phenex-PTFE membranes are inherently hydrophobic and excellent for filtration of 100 % organic or highly acidic or basic samples.
PVDF Syringe Filter – Membrane Solutions
Introduction. MS ® PVDF syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs.
Thermo ScientificTitan3 PTFE (Hydrophobic) Syringe Filters
Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Diameter: 30 mm: Diameter (Metric) Membrane: 30 mm: Housing Material: Medical Grade, Solvent-Resistant, Virgin Polypropylene: Material: PTFE (Hydrophilic) Pore Size: 0.2 µm: Pressure Rating: 90psi
PTFE Syringe Filter – Membrane Solutions
MS ® PTFE Syringe Filters are Broad chemical compatibility , strong chemical stability and inertia ,strong hydrophobicity , suitable for HPLC filtration. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs.
Acrodisc® Syringe Filters With Universal Membranes - HPLC
HPLC certified for low levels of UV-absorbing extractables. Acrodisc Syringe Filter with wwPTFE Membrane - 0.2 µm, 25 mm (200/pkg) Product ID 4927. Pore Size 0.2 ...
0.2 filter | Sigma-Aldrich
0.2 um filter ( 0.2 micron ) pore size Hydrophobic PVDF Transfer Membrane for western blotting using Chemiluminescence, Chromogenic or Radioactive detection methods. Comes in an 8.5 cm x 10 m roll. Millipore
Laboratory Filtration Solutions and Equipment | Sterlitech
Filters. Our range of membrane, syringe, and capsule filters represent the industry’s highest quality manufacturing standards, product performance, and application support for laboratory-scale filtration. Reduce process times, increase analytical efficiency and produce consistent, measurable results today with our filtration devices.
Quick Reference Guide Millex Syringe Filters
A variety of membranes and housings ensure chemical compatibility with a range of samples and solvents. Choose From a Variety of Membranes • Millex-LCR filter contains a Millipore-exclusive hydrophilic PTFE membrane and are HPLC-certified for low levels of UV-absorbing extractables. They provide the cleanest sample for HPLC analysis.