Certified hydrophilic ptfe membrane filter for hplc India
Syringe Filter - Nylon Syringe Filters Manufacturer from Mumbai
As an univeral hydrophilic membrane, Hydrophilic PVDF is widely used in chromatography for both clarification of aqueous and aggressive organic solution samples. Due to its ultra-low protien and non-specific binding characteristics, hydrophilic membranesare an excellent choice for proteins, peptides and other biomolecules.
LCR PTFE Membrane Filters - Filter Discs and Membranes
Reagents, Chemicals and Labware > Lab Filtration > Filter Discs and Membranes C135904Low extractables PTFE for clearer results LCR membrane is an unsupported, hydrophilic PTFE membrane compatible with all commonly used HPLC solvents.
Choice™ PTFE (Hydrophilic) Syringe Filters
Use Thermo Scientific Choice PTFE Hydrophilic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions, and as transducer protectors. These Choice Syringe Filters can filter aqueous solutions without the need for pre-wetting with an alcohol.
PTFE Membrane Syringe Filters Type- SYTH
PTFE Membrane Syringe Filters Type- SYTH. mdi Hydrophilic PTFE Syringe Filters type SYTH are specially designed for use in laboratories for small volume filtration and sample preparation.The hydrophilic PTFE membrane and polypropylene (PP)construction makes it suitable even for filtration of highly aggressive solvents.
Syringe Filter, Membrane Filter FQA - filtration solutions
A. A membrane filter is a matrix with channels which act as a screen and retain particles larger than the filter on the surface of the membrane. Membrane filters allow the retention of submicron particles and organisms. Note that pores have not been observed in RO or NF membranes using a microscope.
Membrane Filters | Nylon Membrane Filters | Membrane Filters
Welcome to Axiva, a leading brand for Syringe Filters, Membrane Filters, Filter Papers, Filtration Assemblies, etc. AXIVA SICHEM BIOTECH is an ISO 9001:2015 certified multi product specialty company with expertise in Lab Filtration, Lab Plasticwares, Lab Glass-wares & Lab Instruments.
Syringe Filters for HPLC/HPLC Mobile Phase Filtration
Designed to have good tensile strength and low protein binding properties, polyvinylidene fluoride syringe filters are suitable for HPLC sample preparation. PVDF syringe filters are available in both hydrophobic and hydrophilic states. Nylon Syringe Filters; Ideal for use with aqueous and organic solvents, Nylon Syringe Filters are an excellent choice for filtering high-performance liquid chromatography samples. Nylon syringe filters are durable, tear resistant and wet evenly.
Syringe Filter - HPLC Column I and GC Capillary Column
As an univeral hydrophilic membrane, Hydrophilic PVDF is widely used in chromatography for both clarification of aqueous and aggressive organic solution samples. Due to its ultra-low protien and non-specific binding characteristics, hydrophilic membranesare an excellent choice for proteins, peptides and other biomolecules.
Hydrophilic PTFE Membrane Filter | Hydrophilic PTFE Disc
hydrophilic ptfe membrane filters Media – Polytetraflouro ethylene (Hydrophilic) with PP support Hydrophilic PTFE Disc Filters are chemically and biologically inert and stable up-to 260ºC and will with stand most concentrated acids and bases.
PTFE Membrane Filters - Membrane Filters | Sigma-Aldrich
Milliseal Membrane Seal, PTFE, 18 mm This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration. pricing
PTFE filter membrane | Sigma-Aldrich
BRAND ® macro pipette controller membrane filters 3 μm (PP,PTFE) Syringe Filter, Hydrophilic PTFE, Automation Compatible, Non-sterile ... LG hydrophilic PTFE ...
Merck Millipore Non-Sterile Millex Syringe Filter: Syringe
Millex™-LG, LCR filters contain hydrophilic PTFE membranes and are HPLC-certified; for low levels of UV-absorbing extractables. Hydrophilic PTFE membranes have broad chemical compatibility, enabling filtration of aqueous and organic solvents. 33 mm hydrophilic PTFE Millex™ filters have faster flow rates than 25 mm filters.
Millex Syringe Filters - The United Scientific Company, Chennai
Millex® syringe filters with hydrophilic PTFE membrane provide the lowest IC extractable levels and broad chemical compatibility with both aqueous and organic solutions. Syringe filters are available in two pore sizes and two diameters to optimize results.
HPLC Mobile Phase Filtration Membranes - Pall Shop
Membranes are identical in composition and quality to those used in Pall’s HPLC-certified Acrodisc ® syringe filters; HPLC certification assures that the filters will not add artifacts to your analysis; GH Polypro membrane is the best choice for filtering mobile phases; PTFE membrane provides the ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases
Aijiren Captiva Syringe Filters RAISE YOUR SAMPLE FILTRATION
manufacturer. All Aijiren Captiva Premium Syringe Filters are supplied with a HPLC or LC/MS Certificate. Choose from a variety of membrane types and pore sizes to suit your needs. Aijiren Captiva Premium Syringe Filters Premium Filters, 100/pk Description Diameter (mm) Pore Size (µm) Certification Housing Part No. PTFE 4 0.2 LC Polypropylene
Minisart® SRP15 Syringe Filter 17574----------Q, 0.45 µm
The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids.
PTFE Membrane Syringe Filters Type- SYTH
PTFE Membrane Syringe Filters Type- SYTH. mdi Hydrophilic PTFE Syringe Filters type SYTH are specially designed for use in laboratories for small volume filtration and sample preparation.The hydrophilic PTFE membrane and polypropylene (PP)construction makes it suitable even for filtration of highly aggressive solvents.
PTFE Syringe Filters, 0.45μm, 13mm, Hydrophilic, Non-sterile
All the syringe filters are HPLC certified. Hydrophilic PTFE syringe filters have broad chemical compatibility, high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Syringe Filters for HPLC and sample preparation | analytics
Regenerated cellulose membranes are solvent resistent and hydrophilic. 0.45 µm pore sizes are mainly used for HPLC sample preparation. This membrane type is resistent versus most solvents, as well as aqueous solutions with a pH from 3 to 12 and temperature stable up to 200° C.
SCORP Corporation - Home - Laboratory SupplierSyringe Filters
PTFE, Hydrophilic - Good chemical and pH resistance, suitable for HPLC filtration- available filter diameter 13mm and 25mm. PTFE, Hydrophobic - Use as a vent or to protect vacuum pumps-available filter diameter 3mm, 13mm, 25mm and 50mm.
HPLC Mobile Phase Filtration Membranes - Pall Shop
Membranes are identical in composition and quality to those used in Pall’s HPLC-certified Acrodisc ® syringe filters; HPLC certification assures that the filters will not add artifacts to your analysis; GH Polypro membrane is the best choice for filtering mobile phases; PTFE membrane provides the ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases
Ptfe Hplc Syringe Filter at Thomas Scientific
mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile | SLLHC13NL
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile 0.45 µm pore size, 13 mm diameter, Millex-LH hydrophilic PTFE membrane, ion chromatography certified - Find MSDS or SDS, a COA, data sheets and more information.
Performance filtration solutions
hydrophobic nature, PTFE filters can be utilized as a moisture barrier in venting applications. PTFE membranes require pre-treatment with alcohol before being suitable for aqueous or high aqueous/organic samples. Do not use directly with aqueous solutions. Specifications Membrane: HPLC certified PTFE, w/polypropylene support
Hydrophilic filter Manufacturers & Suppliers, China
hydrophilic filter manufacturer/supplier, China hydrophilic filter manufacturer & factory list, find qualified Chinese hydrophilic filter manufacturers, suppliers, factories, exporters & wholesalers quickly on Made-in-China.com.
Mobile Phase Filtration - Analytical QC | Pall Corporation
A Highly Versatile Laboratory Membrane Filter Excellent chemical compatibility with esters, bases, and alcohols ; Naturally hydrophilic; Available in 0.2 and 0.45 µm pore sizes, in diameters ranging from 13 to 142 mm; HPLC certified. Provides assurance that the filter will not add artifacts to your analysis 9 Part numbers available
Millex Syringe Filters - The United Scientific Company, Chennai
Millex® syringe filters with hydrophilic PTFE membrane provide the lowest IC extractable levels and broad chemical compatibility with both aqueous and organic solutions. Syringe filters are available in two pore sizes and two diameters to optimize results.
Hydrophilic PTFE Syringe Filter – Membrane Solutions
Hydrophilic PTFE syringe filter is a versatile filter for aqueous and aggressive organic solvent-based solutions and especially ideal for HPLC operation. Pure polypropylene housings and color-coding housings include smooth rim or gear rim are all available. Hydrophilic PTFE Syringe Filter
PTFE-T Syringe Filter – Dorsan
PTFE-T Syringe Filter. Does not need pre-wetting. Hydrophobic or hydrophilic versions. Compatible with aggressive solutions. High heat resistance. Ideal prefilter in samples for HPLC. PTFE Polytetrafluorethylene Syringe Filters T Series. DORSAN® syringe filters, manufactured with naturally hydrophobic Polytetrafluorethylene membranes (PTFE).
Hydrophilic PES Membrane for HPLC – Membrane Solutions
Hydrophilic PES Membrane for HPLC . Descriptions. Hydrophilic PES membrane consists of pure polyether sulfone polymers without support. It can provide good mechanical strength, thermal stability and broad chemical compatibility. It’s applicable for pure water filtration, particles removal of HPLC aqueous mobile phase, preventing column clogging.