Certified luer lock filter ptfe syringe filter for hplc pall
Syringe Filters - BGB Analytik
With a female luer lock inlet and male slip outlet, the syringe filter easily fits onto the end of the disposable syringe containing the sample, as shown in Figure 1. The extract is gently pushed through the filter into a sample vial for injection, removing damaging particulates from the final extract.
PTFE Membrane Syringe Filters Type- SYTF
PTFE Membrane Syringe Filters Type- SYTF. mdi SYTF with PTFE membrane and polypropylene construction are suitable even for filtration of highly aggressive solvents.. $0.00; Ex Tax: $0.00
Syringes for HPLC and GC, Autosampler Syringes, Needles and
the syringe with removable needle reduces cost over time because only the needle needs to be replaced if bent or blocked; possibility to use the needle for different applications (OD, different length or different tip) Luer Lock termination: specifically desgined to secure Luer Lock needles, fittings, syringe filters
Syringe Filter at Thomas Scientific
Denville Scientific Syringe Filters are constructed so that the sample must pass through the membrane, not leak around it. Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition. The 30mm syringe filters can filter up to 100mL
Luer Lock Filters, Hydrophobic PTFE Syringe Filters Suppliers
FILTSTAR series PTFE syringe filters are made of imported PTFE hydrophobic membrane, almost chemically resistant to all solvents such as strong acids, alcohols, bases, aromatics. It is widely used in biological, electronic, medical, and chemical industries and can also be used to prevent moisture from passing through air vents. See full list on hawachfilters.com
VWR® Syringe Filters | VWR
Syringe filters with cellulose acetate or polyethersulfone membranes are ideal for sterile filtration of buffers, tissue culture media or additives, and other biologicals. The polyethersulfone membrane offers high flow rates. Nonsterile syringe filters are excellent for HPLC applications.
Corning® syringe filters regenerated cellulose membrane, diam
These Corning syringe filters have polypropylene copolymer housings, female luer lock inlets and male luer slip outlets. • Regenerated cellulose (RC) membranes are the best choice for DMSO compatibility • 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic • Manufactured in accordance with ISO 9002 standards
Cole-Parmer® PTFE Syringe Filters - Cole-Parmer
Filters are Triton-free and have a bidirectional membrane support and luer lock (15/25 mm dia) or stepped barbs (50 mm dia) inlet/outlet for a secure fit to the syringe. Membrane type and pore size are printed on each filter for easy identification.
Titan3 and Target2 Chromatography Syringe Filters
• Recommended for HPLC and UHPLC PVDF syringe filters have a well defined pore structure, giving effective retention of particles without excessive pore blockage. Compatible with aqueous and most organic solvents. They are excellent general filters for HPLC and organic solvent sample clean up. Specifications Membrane: HPLC certified PVDF
Ptfe Hplc Syringe Filter at Thomas Scientific
All our syringe filters are HPLC certified. Housing Material: Polypropylene Effective Filtration Area (cm2): 4.08 Pore Size (µm):0.22 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating
Free sample wheel filters ptfe filters for hplc millipore
Iso9001 wheel filters nylon filters for hplc millipore. Cheap Syringe Filters With MCE NYLON PVDF PES PTFE CA 0.22um 25mm nylon syringe filter for sample preparation, 13 25 33mm wheel Syringe Filters for sale 13mm PVDF merane 0.45 micron syringe filter, wholesale laboratory 0.22 micron syringe filter Non
Whatman Syringe Filters | Disposable Syringe Filters
Whatman™ 10463102 SPARTAN™ 13 HPLC Certified Syringe Filter with Regenerated Cellulose Membrane, Diameter: 13mm, Pore Size: 0.2µm (Pack of 500) Certified for the absence of UV-absorbing substances at 210 and 254nm with water, methanol and acetonitrile Inlet: Luer-Lock Female; Outlet: Luer-Male Diameter: 13mm.
Laboratory Filters | Filtration Products | Waters
Filter Design. Pall Life Sciences' broad range of device sizes assures complete sample filtration with minimal sample loss. In addition, many Acrodisc Syringe Filters offer the option of a minispike outlet, rather than the traditional male luer outlet.
PTFE Membrane Syringe Filters Type- SYTH
PTFE Membrane Syringe Filters Type- SYTH. mdi Hydrophilic PTFE Syringe Filters type SYTH are specially designed for use in laboratories for small volume filtration and sample preparation.The hydrophilic PTFE membrane and polypropylene (PP)construction makes it suitable even for filtration of highly aggressive solvents.
Syringe Filters Luer Lock at Thomas Scientific
Luer lock inlet offers leak-tight syringe connection Variety of filter types, porosities, and diameters Color coded for easy identification Rugged polypropylene housing Autoclavable to 121°C for 15 minutes Quantity break pricing for greater savings Cellulose Acetate, Nylon,