Cheap luer lock filter ptfe filters for hplc acrodisc

Acrodisc® Syringe Filters for Prefiltration, Pall Laboratory

For prefiltering heavily contaminated aqueous or solvent based samples.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments

PTFE Syringe Filters - Non-Sterile Syringe Filters

PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-Sterile Syringe Filters

Pall 4225 Acrodisc Syringe Filter, PTFE, 0.2um, Pk 50

Pall 4225 Acrodisc Syringe Filter, PTFE, 0.2um, Pk 50. The hydrophobic PTFE membrane provides exceptional chemical and temperature compatibility. Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections. All membranes are HPLC certified for low levels of UV-absorbing extractables. Typical hold-up volume

acrodisc syringe filter, acrodisc syringe filter Suppliers

Syringe Filters Filters Micron Darlly 0.22 0.45 Micron Hydrophilic PTFE Syringe Filters For Filtering HPLC Samples Available In 0.22 For UHPLC Applications US $5.00-$10.00 / Piece 100.0 Pieces (Min Order)

Syringe Filters | Fisher Scientific

Syringe Filters Cytiva Whatman™ Filtres pour seringues en acétate de cellulose non stériles Puradisc™ FP 30 mm Présentent de très faibles niveaux de liaison protéique, de sorte qu’ils conviennent aux applications de récupération protéique.

Pall 4225 Acrodisc Syringe Filter, PTFE, 0.2um, Pk 50

The hydrophobic PTFE membrane provides exceptional chemical and temperature compatibility. Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections. All membranes are HPLC certified for low levels of UV-absorbing extractables. Typical hold-up volume: \<100µL.

Cheap 0.2 um 5 um 10um hydrophobic ptfe material syringe filter

The units are ready-to-use and allow for simple, rapid and reliable ultra-cleaning of small volume samples for HPLC or GC analysis. PTFE filters can also be used to prevent moisture passing through air vents. Features . 1. Sterile hydrophobic PTFE syringe filter. 2. High flow rate at low inlet pressure. 3. Low extraction and excellent thermal

Spuitfilters, Acrodisc®, PTFE | VWR

Nowhere in the information did it mention the diameter of the Luer. When I opened the carton I discovered that the Luer was half the diameter of the injection port. I have been using this type of filter for over 25 years and have never come across anything other than a standard Luer or Luer-lock fitting.

Premium wheel filters ptfe syringe filter for hplc Aijiren

Analysis of Food Additives in Beverages Using Syringe Filter Filtration and HPLC Aijiren. Captiva Premium syringe filters prior to HPLC analysis. The following syringe filter types were evaluated for filtration recovery of food additives. For samples in aqueous media:† Aijiren Captiva Premium PES syringe filter, 25 mm, 0.2 µm (p/n 5190-5098

Acrodisc® Syringe Filters with PTFE Membrane - HPLC/UHPLC

Prevents spurious peaks on chromatograms for accurate experimental results. HPLC certified for low levels of UV-absorbing extractables. Prevents "air bubble" lock when filling sample vials with 13 mm minispike outlet. 4 mm device offers the lowest sample hold-up (< 10 μL) and is useful for samples up to 2 mL in volume.

6784-0404 - Syringe Filter, Puradisc, PTFE, 4 mm, 0,45 µm

Puradisc 4 Syringe Filter, 0.45 µm, PTFE Puradisc Syringe Filters combine premium quality and economy. They are well suited for quick, efficient filtration of samples up to 100 ml volume. Standard inlet and outlet luer connectors. Optional sterile, medical-grade blister pack. Tube-tip format (optional) for accurate dispensing into a micro-vial.

Ptfe Hplc Syringe Filter at Thomas Scientific

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are Related Products: 0.45 Syringe Filter

PTFE Syringe Filters, 0.45 um, 25mm, Luer-Lok/Luer Slip

PTFE Syringe Filters, 0.45 um, 20mm, Threaded Double Luer Lock, ABS Housing, sterile, 1000 per pack TSH-SPEC18148 $2,344.60 Ideal for laboratory small volume samples clarification and particles removal.Features and Benefits Easy to use Wide range of filter media Applicable to samples below 60mL Disposable

Acrodisc 25 mm Syringe Filters | | 320191 | Spectrum Chemical

Acrodisc ® 25 mm Syringe Filters These syringe filters offer a choice of filter media. Hydrophobic PTFE membrane for exceptional chemical and temperature compatibility and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and nonaggressive, solvent-based mobile phases.

Pall 13mm Acrodisc Syringe Filters 2401, PTFE with minispike

Pall 13mm Acrodisc Syringe Filters, PTFE with minispike, 0.2 um, NON-sterile, case of 1,000. Pall Catalog No. 2401