Common use hydrophilic ptfe filters for hplc millipore
Millipore Filters 0.22 Um - Autosampler Vial, Hplc Vial, PTFE
Hplc Sample Preparation Use Millipore Filters 0.22 um. * Widely used in HPLC sample preparation. * Syringe filter produced in Ultrasonic seamless welding technology. * Wide filter material choice for different chemicals, Nylon, PTFE, PVDF, PES, CA, MCE
JHWP04700 Millipore Omnipore Membrane Filter
Omnipore Membrane Filter 0.45 um pore size, Hydrophilic PTFE membrane, 47 mm diameter - Find MSDS or SDS, a COA, data sheets and more information.
Universal Hydrophilic Syringe Filters: Millex® Hydrophilic PTFE
Millex® hydrophilic PTFE syringe filters boast broad chemical compatibility and are HPLC-certified, guaranteeing low extractables. With their robust performance, these filters can be used for a variety of samples without the risk of membrane failure or sample contamination.
Millex Syringe Filter, Hydrophilic PTFE - Merck Millipore
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile Replaces SLLGH25NB, 0.20 µm pore size, 33 mm diameter, Millex-LG hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.
The Samplicity System High-Performance Multi-sample
µm or 0.45 µm hydrophilic PTFE Millex Samplicity™ filters (EMD Millipore Catalogue Nos. SAMPLG001 or SAMPLCR01) using the Samplicity™ filtration system (EMD Millipore Catalogue Nos. SAMPSYSGR or SAMPSYSBL). Determination of holdup volume and sample volume recovery HPLC vials and Millex Samplicity™ filters (0.20 µm filters and 0.45 µm
Merck Millipore products for filtration | analytics-shop.com
Filtration products by Merck. At Analytics-Shop you find a large selection of membrane filters and syringe filters by Merck Millipore. We offer a broad variety of different filter membranes of high quality, e.g. Merck Millipore millex syringe filters and ominpore or isopore membrane filters by Merck Millipore.
Millipore FHLC01300 White PTFE LCR Hydrophilic Membrane
LCR is an unsupported hydrophilic PTFE membrane compatible with all commonly used HPLC solvents. It can be used to filter aqueous fluids without prior wetting. Available in syringe filters. Filter Material: Hydrophobic PTFE. Media Brand Name: Hydrophilic LCR (PTFE). Filter type: Screen filter. Pore Size ( m): 0.45. Wettability: Hydrophilic.
LCR Membrane Filter | FHLC02500 - Merck Millipore
LCR Membrane Filter: Background Information: LCR membrane is an unsupported, hydrophilic PTFE membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractabes, ensuring that it will not add anything to your HPLC solvents, providing clearer analysis results.
Difference between hydrophilic and hydrophobic filters
Hydrophilic filters can be wetted with virtually any liquid, and are the preferred filters for aqueous solutions, as appropriate by compatibility. Once wetted, hydrophilic filters do not allow the free passage of gases until the applied pressure exceeds the bubble point and the liquid is expelled from the pores of the membrane.
Millipore JAWP01300 White PTFE Omnipore Hydrophilic Membrane
Omnipore membrane is hydrophilic PTFE compatible with virtually all solvents, acids, and alkaline solutions (for HPLC solvent filtration, use LCR membrane). Trade name: omnipore. Filter material: hydrophilic PTFE. Media brand name: Omnipore. Filter type: screen filter. Maximum operating temperature: 130 degree C. Pore size ( m): 1.0.
Biopore Membrane Filter roll, Hydrophilic PTFE | BGCM00010
Biopore Membrane Filter roll, Hydrophilic PTFE This Biopore membrane roll is hydrophilic, with a pore size of 0.4 microns. - Find MSDS or SDS, a COA, data sheets and more information.
FHUP04700 Millipore Fluoropore Membrane Filter
Our Omnipore™ membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions. Features & Benefits: - Biologically and chemically inert - High porosity yields high flow rates - Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples Applications:
Quick Reference Guide Millex Syringe Filters
• Millex-LCR filter contains a Millipore-exclusive hydrophilic PTFE membrane and are HPLC-certified for low levels of UV-absorbing extractables. They provide the cleanest sample for HPLC analysis. • Durapore® (PVDF) filters combine fast flow with low protein binding. • Nylon filters provide broad chemical compatibility
LCR Membrane Filter | FHLC02500 - EMD Millipore
FHLC02500. Description. LCR Membrane Filter. Background Information. LCR membrane is an unsupported, hydrophilic PTFE membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractabes, ensuring that it will not add anything to your HPLC solvents, providing clearer analysis results.
MilliporeSigma LCR Hydrophilized PTFE Membrane Filters
Made of unlaminated PTFE resin; White, hydrophilic cut discs for removal of particles larger than 0.5µm; Used with all common HPLC solvents; Will not contaminate a sample with extractables; Wetting time: 5 secondsThickness: 5.5mil (0.14mm) max. Applications: Clarification of acids, bases, and cryogenic fluids; Clarification of propellants
SLLGX13NL Millipore Millex Syringe Filter Unit,
HPLC-certified for low levels of UV-absorbing extractables. Applications: Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic Solutions. Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE.
Syringe Filters | Life Science Research - Merck Millipore
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
Millipore JAWP01300 White PTFE Omnipore Hydrophilic
Omnipore membrane is hydrophilic PTFE compatible with virtually all solvents, acids, and alkaline solutions (for HPLC solvent filtration, use LCR membrane). Trade name: omnipore. Filter material: hydrophilic PTFE. Media brand name: Omnipore. Filter type: screen
Merck Millipore Nylon Hydrophilic Membrane Filters:
Merck Millipore Nylon Hydrophilic Membrane Filters Filtration of aqueous or organic solutions £91.42 - £208.00
Difference between hydrophilic and hydrophobic filters -
Hydrophobic filters are best suited for gas filtration, low surface tension solvents, and venting. In certain applications, hydrophobic filters are used to filter aqueous solutions because of
The Advantages of Minisart Hydrophilic Syringe Filters for HPLC
Minisart® Hydrophilic Syringe Filters for HPLC Sample Preparation Sartorius Minisart ® Versus Other Competitor Hydrophilic Filter Materials Methanol Filtered using Nylon, competitor C Filtered using hydrophilic PTFE, competitor A Filtered using PVDF ® NY
Millipore offers more hydrophilic PTFE membranes
The new membrane filters, comprising the US firm's Omnipore series, are available as 13 mm, 25 mm, 47 mm, 90 mm and 142 mm cut disks in a range of pore sizes from 0.1-10 µm. They join Millipore's LCR membrane, also hydrophilic but used in HPLC solvent
Merck Millipore LCR Hydrophilized PTFE Membrane
Description Made of unlaminated PTFE resin White, hydrophilic cut discs for removal of particles larger than 0.5μm Used with all common HPLC solvents Will not contaminate a sample with extractables Wetting time: <5 seconds Thickness: 5.5mil (0.14mm) max.
Fluoropore Membrane Filter | FHUP04700 - EMD Millipore
Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions. Features & Benefits: - Biologically and chemically inert - High porosity yields high flow rates - Hydrophobic and hydrophilic
Microfiltration Membranes | Chromatography Sample
Fluoropore , Mitex , Omnipore , and LCR HPLC-Certified Membrane Filters Material: PTFE (polytetrafluoroethylene) Features: High flow rate and broad chemical compatibility Applications: Clarification of acids, bases, solvents, and analysis of hydraulic fluids.
SLLGM25NS Millipore Millex Syringe Filter, Hydrophilic
Millex Syringe Filter, Hydrophilic PTFE, HPF, Non-sterile 0.20 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane with glass fiber prefilter, domed housing - Find MSDS or SDS, a COA, data sheets and more information.
Low-extractable Millex Samplicity filters application note
PTFE) and LG (0.20 µm hydrophilic PTFE) filters using three commonly used HPLC detectors. The detectors used were an ultraviolet/visible (UV-Vis) spectrophotometer, a mass spectrometer and a fluorescence detector. Materials and Methods 0.45 µm and 0.2
LCR Membrane Filter | FHLC02500 - EMD Millipore
LCR membrane is an unsupported, hydrophilic PTFE membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractabes, ensuring that it will not add anything to your HPLC
MilliporeSigma™ Nylon Hydrophilic Membrane Filters |
Resist most commonly used HPLC solvents Hydrophilic discs made of noncharged, unreinforced Nylon 66 in 0.2 and 0.45μm pore sizes Won't contaminate a sample with extractables Autoclaved or sterilized by EtO Thermal compatibility: ≤135 C (275 F)
SLCR025NB Millipore Millex Syringe Filter, Hydrophilic
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS ITEM WILL BE REPLACED BY SLCR033NB Replaced by SLCR033NB, 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more