Common use luer lock filter ptfe filters for hplc waters

PTFE Syringe Filters - Non-sterile syringe filters

PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-sterile syringe filters

Syringe Filters

PTFE syringe filters are hydrophobic and chemically resistant to all solvents, acids, and bases. PTFE does not impart any extractables to the filtrate. It's an ideal material for transducer protectors because it blocks water vapor. PTFE is ideal for filtering and de-gassing chromatography solvents.

Syringe Filters for HPLC and UHPLC

Cronus 4mm, 0.2µm PTFE syringe filter. Lowest Extractables. Luer Lock inlet, Luer Spike outlet. PTFE is a hydrophobic membrane and chemically resistant to virtually all solvents. It can be used for working with aggressive media such as strong acids and bases; Ideal for use with samples of <2ml; Retention volume: <7.5µl . Download brochure

PTFE Syringe Filters - Camlab

A range of economical, disposable and extremely easy to use PTFE syringe filters. Designed with female luer lock inlet and male luer slip outlets. Sterile filters are RNase, DNase, DNA and pyrogen free and are individually wrapped. Packs of 1000 filters are packaged in clear bags. Applications. Broad Chemical Compatibility

Whatman® Puradisc 25 syringe filters 0.45 μm, PTFE, 1000/pk

Puradisc syringe filters combine premium quality and economy. They are ideal for the quick, efficient filtration of samples up to 100 mL volume. Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer lock) and outlet (male luer) connections (unless otherwise stated).

4 Mm Syringe Filter at Thomas Scientific

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.

Low Cost 0.45um PTFE Syringe Filter Double Lure-lock Design

0.45um PTFE Syringe Filter can withstand the most corrosive solvents, acids and alkali samples and are ideal for filtering highly corrosive colloid solutions. These filters can be used under extreme chemical or temperature conditions and are ideal for analytical and research applications requiring non-water/organic solvent filtration.

PTFE Membrane Syringe Filters Type- SYTF

PTFE Membrane Syringe Filters Type- SYTF. mdi SYTF with PTFE membrane and polypropylene construction are suitable even for filtration of highly aggressive solvents.. $0.00; Ex Tax: $0.00

What syringe filter is the best for my application? - The

Sep 07, 2020 · Luer Slip – will fit on to any Luer fitting syringe. Simply ‘slip’ the filter onto the end of your syringe. It is quick to add and remove from the syringe; Luer Lock – will only fit onto a Luer Lock syringe. The filter locks into place and this allows for a greater pressure to used with the filter popping off like it would do on Luer slip.

Syringe Filter(PTFE) - Quzhou Lab Technology Co.,Ltd,hplc

Syringe Filter(PTFE) A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so. The use of a needle is optional; where desired it may be fitted to the end of the syringe

Luer Lock HPLC Waste Line Adapters - CP Lab Safety

Measure the Outer Diameter (OD) of your tubing to determine the size of Luer Lock fitting that you need. Use the color coding below for easy recognition and reordering: 1/16" luer lock adapter is red with blue inner ferrule; 1/8" luer lock adapter is white with yellow inner ferrule; 1.8 to 2mm luer lock adapter is red with green inner ferrule

Laboratory Filters | Filtration Products | Waters

Filters are packaged into separate tubes to protect them from external sources of extractables. While one tube is in use, the others are kept sealed. Excellent chemical resistance. Use this universal filter for all your LC-MS samples. The WWPTFE (water wettable polytetrafluoroethylene) membrane can be used with both organic and aqueous solvents.

Luer Lock Filters, Hydrophobic PTFE Syringe Filters Suppliers

FILTSTAR series PTFE syringe filters are made of imported PTFE hydrophobic membrane, almost chemically resistant to all solvents such as strong acids, alcohols, bases, aromatics. It is widely used in biological, electronic, medical, and chemical industries and can also be used to prevent moisture from passing through air vents.

Syringe Filters for HPLC & Sample Preparation | analytics

Pore Sizes and Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.

Ptfe Hplc Syringe Filter at Thomas Scientific

Filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC with the Thermo Scientific™ Nalgene™ 50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent barrier for sterile venting of Related Products: Inline Vacuum Filter