Common use luer lock filter ptfe membrane filter for hplc acrodisc
Syringe filters, Acrodisc®, PTFE | VWR
Nowhere in the information did it mention the diameter of the Luer. When I opened the carton I discovered that the Luer was half the diameter of the injection port. I have been using this type of filter for over 25 years and have never come across anything other than a standard Luer or Luer-lock fitting.
FILTRATION DEVICES EUROPE biomedical innovations
Filter Inlet Luer-Lock Female Filter Outlet - 15mm Luer-Male Mini Tip Filter Outlet - 25/30mm Luer-Male Pre-Filter Available Sterile Available Housing Ultrasonic Welded Polypropylene Ring Color Coded Optional Choosing the Proper Pore Size Cleaning Operation Optimal Pore Size Sterile Filtration 0.20 µm Thorough Cleaning 0.45 µm Clear Filtration 1 - 2 µm
Minisart® SRP25 Syringe Filter 17576----------K, 0.45 µm
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17576 with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
Acrodisc-25-mm-Syringe-Filters | 701919 | SpectrumRx
• Polypropylene housing with female luer-lock inlet and standard male slip luer outlet • All membranes are HPLC certified for low levels of UV-absorbing extractables †PVDF membrane is not for use with acetone, DMF, DMSO, or bases >6N Image(s) are representative of the product group and not necessarily the individual product.
Cole-Parmer® PTFE Syringe Filters - Cole-Parmer
Polytetrafluoroethylene (PTFE) membranes are unaffected by most organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Ideal for sterilization of gas and alcohols; cleaning acids, alkalies, and organic solvents; venting purposes. Use with aggressive chemicals. Filters are Triton-free and have a bidirectional membrane support and luer lock (15/25 mm dia) or stepped barbs (50 mm dia) inlet/outlet for a secure fit to the syringe.
Pall Acrodisc Syringe Filters - daigger.com
The Nonsterile Acrodisc™ PTFE Filter is the ultimate in chemical compatibility for filtering harsh chemicals that destroy other membrane materials. Nonsterile PVDF Acrodisc™ features a polyvinylidene diflouride membrane which is chemical-resistant, hydrophobic, and solvent-compatible for HPLC sample preparation. Autoclavable.
Acrodisc at Thomas Scientific
Pall® Acrodisc® Syringe Filter with PTFE Membrane Pall Laboratory These syringe filters are ideal for filtration of gas and organic solvents Polypropylene housing HPLC certified The polypropylene housing is fitted with female Luer-lock inlet and male slip Luer outlet.
Low Cost Nylon Syringe Filters - Membrane filters, syringe
Also note that nylon-66 syringe filters are often compatible. Contact us for advise. Sterile Nylon syringe filters are available as well. Hydrophilic Nylon is most ideal for aqueous (non-acidic) or organic sample prep. In addition, Nylon syringe filter for hplc , GC or dissolution trial analysis are among the most popular uses.
Acrodisc® syringe filters Nylon membrane, diam. 25 mm, pore
General description. These offer high quality filtration for analytical samples. Certified for HPLC to ensure low extractables. Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume.
Product Information: Sterile Acrodisc Syringe Filters with
Filter Media: Supor® membrane (hydrophillic polyethersulfone) Housings: 13: Polypropylene 25: Modified Acrylic Effective Filtration Area 13 mm: 1.0 cm2 25 mm: 2.8 cm2 Typical Hold-Up Volume (with air purge) 13 mm: < 28 µL 25 mm: < 70 µL Inlet/Outlet Connections Female luer lock inlet Male slip luer outlet Maximum Operating Pressure 5.2 bar (520 kPa, 75 psi)
Solvent Compatibility Chart for Syringe Filters
4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure. 6 Rugged polypropylene construction— autoclavable to 121 °C for 15 minutes (75 psi). 7 Color coded by membrane for easy identification. 8 Convenient dispenser box. 9 FREE sample pack available. Contact your Restek sales
Acrodisc® Syringe Filters with PTFE Membrane from Pall Life
" These filters speed up sample processing time. My samples pass though easily, they are easy to attach and remove from the syringe and they come in many different sizes. " Review date: 29 Jan 2015 | Acrodisc® Syringe Filters with PTFE Membrane
Simplifying Sample Prep for University Labs
For cell cryopreservation, use DMSO-safe Acrodisc syringe filters that necessarily undergo EtO sterilization. Sterile Acrodisc ® Syringe Filters Simplifying Sample Prep for University Labs Pall Life Sciences develops and produces many different membrane chemistries for a multitude of applications.
Acrodisc® 25 mm Syringe Filter, 0.2 µm PTFE Membrane, 200/cs
Ultimate in chemical compatibility for filtering harsh chemicals that destroy other membrane materials. The Acrodisc PSF GxF syringe filter provides two to four times the throughput of standard prefilter devices. Moisture barrier for venting applications. 25 mm Acrodisc PSF syringe filter is available in robotic-compatible AutoPack™ packaging.
Pall® Acrodisc® glass fiber syringe filters diam. 25 mm, pore
Specifications: • Material: Filter Media - Borosilicate glass fiber • Effective Filtration Area: 3.9 cm 2 • Sample Volume: < 150 mL • Inlet/Outlet Connections: Female luer lock inlet, male slip luer outlet • Typical Hold-Up Volume (with air purge): < 125 μL • Maximum Operating Temperature: 82°C (180°F) at 2.1 bar (210 kPa, 30 psi)