Common use luer lock filter ptfe membrane filter for hplc millex
Millex® syringe filter units, disposable, PTFE pore size 5 μm
All units contain PTFE filter membranes in plastic housings with Luer lock inlet and Luer slip outlet fittings. Units smaller than 25 mm diameter are specifically designed to minimize hold-up in filtration of small volumes. The 3-4 mm units are recommended for volumes of <1 mL; the 13 mm units are recommended for volumes of 0.5-10 mL.
Titan3™ PTFE (Hydrophobic) Syringe Filters
Available in sizes and membrane types to meet any application need, Thermo Scientific™ Titan3™ PTFE Hydrophobic Syringe Filters provide cleaner sample extracts by removing interfering materials and fine particles. These filters are used for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors.
PTFE Membrane Syringe Filters with pre-filter Type- SYTG
PTFE Membrane Syringe Filters with pre-filter Type- SYTG. mdi SYTG with PTFE membrane and multilayered binder free borosilicate microglassfiber pre-filter provide absolute retention of very difficult to filter colloidal contaminants. These are specially used to filter highly turbid (hazy) solutions. $0.00; Ex Tax: $0.00
Solvent Compatibility Chart for Syringe Filters
Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure.
Syringe and Syringeless Filters - Fisher Sci
Bottle Tops and Filter Units; Extraction Thimbles; Filter Holders and Hardware; Filter Paper; Filtering Funnels; Food and Beverage Testing; Glass Fiber Filters and Prefilters; Membranes for Filtration; Syringe and Syringeless Filters; Water Testing and Environmental Analysis
Ptfe Nonsterile Syringe Filters at Thomas Scientific
This 4 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 4 mm Millex filters are perfect for small sample sizes Non-sterile with excellent solvent resistance Male Luer slip fitting
PTFE Membrane Syringe Filters Type- SYTF
PTFE Membrane Syringe Filters Type- SYTF. mdi SYTF with PTFE membrane and polypropylene construction are suitable even for filtration of highly aggressive solvents.. $0.00; Ex Tax: $0.00
Millipore SLFGL25BS In Line Filter Hydrophobic PTFE
Millipore SLFGL25BS In Line Filter Hydrophobic PTFE Hydrophobic PTFE Millex-FG In Line Filter Unit, 0.2 Micron, Inlet and Outlet Female Luer-Lok x Male Luer-Lok Connection, 25mm Diameter (Pack of 50): Science Lab Inline Filters: Amazon.com: Industrial & Scientific
PTFE Syringe and Vent Filters - Sterlitech
Because of their low inherent levels of extractables, nylon membrane syringe filters are commonly used to filter samples that are intended for HPLC analysis. Nylon membrane syringe filters may not be suitable for all samples and are ideal for near neutral pH aqueous solutions and compatible nonaqueous solvents.
PTFE Syringe Filters - Non-sterile syringe filters
PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-sterile syringe filters
Syringe Filters | Sigma-Aldrich | Sigma-Aldrich
Buy Disposable Syringe Filters suitable for variety of applications. Choose the right syringe filter for your application. Luer lock syringe filters are available in a variety of porosities and membrane materials, including PTFE, PVDF, Alumina, Glass Fiber, Polyethersulphone, Polypropylene, Polysulphone, Nylon, Nitrocellulose and Cellulose acetate.
Home | Products | ProFill™ HPLC Syringe Filters
30mm HPLC Syringe Filters with injection-moulded ring. Sample Retention < 0.137ml. Pressure Rating: 620 kPa (= 6.2 bar / = 90 psi) Filter Area: 4.91 cm². With Luer Lock-Inlet (female) and Luer Slip (male) 30mm HPLC Syringe Filter. Glass Fibre Prefilter/PTFE, 0.2µm, Injection-moulded ring blue.
Syringe Filters - Fisher Sci
Fisher Scientific - Lagoas Park, Edificio 11 - Piso 0 - Porto Salvo Tel. +351 21 425 33 50 - Fax. +351 21 425 33 51 - pt.fisher@thermofisher.com
PTFE Membrane Syringe Filters Type- SYTH
PTFE Membrane Syringe Filters Type- SYTH. mdi Hydrophilic PTFE Syringe Filters type SYTH are specially designed for use in laboratories for small volume filtration and sample preparation.The hydrophilic PTFE membrane and polypropylene (PP)construction makes it suitable even for filtration of highly aggressive solvents.
China Membrane Filter Manufacturers - Membrane Filter
Microporous Membrane Filter The microporous membrane filter is mainly used for the filtration of mobile phase and samples during the chromatographic analysis, especially for preventing chromatographic column and infusion pump line system and sample valve from pollution.