Free sample hplc filter ptfe syringe filter for hplc USA

Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA) Qty/Pack: 100pcs/pack Application: Filter Payment: T/T MOQ: 1 pack

Inquiry Chat Now

Product Description

ProMax™ Syringe Filters - Dikma Technologies Inc.- A reliable

ProMax™ syringe filters are designed for economical, rapid filtration of almost any solution prior to analysis. The housing attaches to any standard Luer lock syringe, so the sample can be pushed through the membrane under pressure. The resulting eluent is free from particulates and ready for use in HPLC, GC or other analytical techniques.

Quick Reference Guide Millex Syringe Filters

• Millex-LCR filter contains a Millipore-exclusive hydrophilic PTFE membrane and are HPLC-certified for low levels of UV-absorbing extractables. They provide the cleanest sample for HPLC analysis. • Durapore® (PVDF) filters combine fast flow with low protein binding. • Nylon filters provide broad chemical compatibility

PTFE, 25 mm Acrodisc® PSF Syringe Filter| Pall Shop

Acrodisc® Syringe Filter with PTFE Membrane - 0.45 µm (1000/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.

How to Choose Right Syringe Filter -- Filter Membrane Materials

Applications: Biological samples, tissue culture media filtration, preparation of aqueous samples for HPLC Glass Microfiber (GMF) Glass Microfibre filters should be used as a pre-filter for samples with a high particulate content.

Analysis of Food Additives in Beverages Using Syringe Filter

Captiva Premium syringe filters prior to HPLC analysis. The following syringe filter types were evaluated for filtration recovery of food additives. For samples in aqueous media: † Aijiren Captiva Premium PES syringe filter, 25 mm, 0.2 µm (p/n 5190-5098) and 0.45 µm (p/n 5190-5099) † Aijiren Captiva Premium RC syringe filter, 25 mm, 0.2 µm

Syringe Filters | Life Science Research | Merck

Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.

HPLC Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

Regardless of the application, the potential of encountering such problems can be significantly reduced by utilizing the best HPLC syringe filters for the job. We carry syringe filters made of glass fiber, polypropylene (PP), polyethersulfone (PES), PVDF, polytetrafluoroethylene (PTFE), cellulose acetate, and more.

AQ™ Syringe Filters - Microsolv Technology Corporation

These syringe filters are recommended for "pharmaceutical" grade HPLC Sample Prep & Dissolution Testing when GLP and GMP are required. Manufactured with proprietary and various membrane types in 25mm, 13mm or 4mm polypropylene housings.

Syringe Filters for Chromatography | Sigma-Aldrich

Application HPLC UPLC ® /UHPLC Ion Chromatography/IC; Recommended Pore Size: 0.45 μm syringe filter: 0.2 μm syringe filter: 0.45 μm or 0.2 μm syringe filters

Hydrophilic PTFE Syringe Filter – Membrane Solutions

Hydrophilic PTFE syringe filter is a versatile filter for aqueous and aggressive organic solvent-based solutions and especially ideal for HPLC operation. Pure polypropylene housings and color-coding housings include smooth rim or gear rim are all available.

Cronus Syringe Filters for HPLC Sample Filtration

Cronus 25mm Nylon Syringe Filter 0.45µm with 1µm Glass Fibre Pre-Filter : 100 Pack: FPNN2545-100: 1000 Case: FPNN2545-1000: Cronus 25mm PTFE Syringe Filter 0.2µm. Luer Lock inlet, Luer Spike outlet. 100 Pack: FFPT2502-100: 1000 Case: FFPT2502-1000: Cronus 25mm PTFE Syringe Filter 0.45µm. Luer Lock inlet, Luer Spike outlet. 100 Pack

Kinesis PTFE, Hydrophilic Syringe Filters for UHPLC & HPLC

KX Syringe Filter, Hydrophilic PTFE 13mm 0.45µm • Filter Housing: Polypropylene • Connections: Luer-lok inlet/Luer outlet • Application: UHPLC & HPLC: Application: UHPLC & HPLC: Membrane: Hydrophilic Polytetrafluoroethylene (PTFE) Membrane Diam: 13mm: Pore Size: 0.45µm: Pre-filter: No Pre-filter: Suitable Sample: Aggressive and non

Nalgene Syringe Filters - Thermo Fisher Scientific

• PTFE – Hydrophobic Teﬂ on ™ for sterile venting applications and ﬁ ltration of samples in HPLC/GC solvents. Nalgene non-sterile syringe filters are designed for clarification and particle removal from samples for instrument analysis such as HPLC and GC. Sample Preparation for Chromatography Pore size (µm) Membrane Housing Catalog

Sterile PTFE Syringe Filter - Autosampler Vial, Hplc Vial

Imported membranes from USA and German suppliers make sure that the syringe filters have good Chemical Compatibility. The pre-filter membrane layer can keep big particles on the first layer, which improves the filter efficiency. The ultrasonic welding technique makes sure the air tightness of syringe filters.

Laboratory Filters | Filtration Products | Waters

The minispike outlet, available on 13 mm PTFE, Nylon, GH Polypro, and PVDF Acrodisc Syringe Filters, allows for easy dispensing into autosampler vials. Membrane Design Typically, the first step in selecting a suitable filter is to choose a membrane that is chemically compatible with the sample (see table below for a full selection of mebranes).

Hydrophilic PTFE Syringe Filter – Membrane Solutions

Syringe Filters for HPLC and sample preparation | analytics

Pore Sizes and Pore Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are usually for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm

Laboratory Filters | Filtration Products | Waters

13mm 0.22um Hydrophilic Ptfe Polypropylene Syringe Filter For

13mm 0.22um Hydrophilic Ptfe Polypropylene Syringe Filter For Hplc Vial , Find Complete Details about 13mm 0.22um Hydrophilic Ptfe Polypropylene Syringe Filter For Hplc Vial,13mm 0.22um Hydrophilic Ptfe Syringe Filter,Hydrophilic Polypropylene Syringe Filter,Syringe Filter For Hplc Vial from Other Lab Supplies Supplier or Manufacturer-Zhejiang Aijiren Technologies Co., Ltd.

Kinesis Polytetrafluoroethylene (PTFE) Syringe Filters for

Syringe Filters, PTFE: Short Description: KX Syringe Filter, PTFE 30mm 0.22Âµm w/Pre-filter • Unsuitable Sample: Not recommended for aqueous samples without conditioning • Sample Volume: 90ml • Protein Binding: High protein binding • Burst Pressure: 100psi • Hold up Volume: 140µl • Filter Housing: Polypropylene

hplc sample filter | Sigma-Aldrich

SAMPLG001 ; To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.

Whatman® Mini-UniPrep® syringeless filters PTFE, 0.2 μm, 100

The Whatman Mini-UniPrep Syringeless Filters provide a faster and easier way to remove particulates from samples being prepared for High Performance Liquid Chromatography (HPLC)/ Ultra High Performance Liquid Chromatography (UHPLC) analysis. In fact, Mini-UniPrep lets you prepare samples in one third the time required by other methods.

China 0.45um PTFE 25mm Sterile Syringe Filter for HPLC

0.22um Syringe Filter, Mce Syringe Filter, PP Syringe Filter manufacturer / supplier in China, offering 0.45um PTFE 25mm Sterile Syringe Filter for HPLC, High Pressure Resistance Series Capsule Filter for Inkjet Inks Filtration, 0.22 Micro 1/4′′npt Small Capsule Filter and so on.

HPLC Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

Syringe Filters | Life Science Research | Merck

How to Choose Right Syringe Filter -- Filter Membrane Materials

Syringe Filters | Thermo Fisher Scientific - US

Target2 Routine Syringe Filters Choice Basic Syringe Filters; Range of filter sizes: 4mm to 30mm: 4mm to 30mm: 13mm to 25mm: High-quality filtration solutions : Low extractable membranes and housing : Plain polypropylene housing : HPLC performance tested : Enhanced Luer Lock inlet which provides secure attachment to syringes : Low hold-up

Kinesis PTFE, Hydrophilic Syringe Filters for UHPLC & HPLC

Acrodisc® 25 mm Syringe Filter, 0.2 µm PTFE Membrane, 200/cs

25 mm Acrodisc PSF syringe filter is available in robotic-compatible AutoPackª packaging for SOTAX AT-70 SMART and CTS and Zymark TPW, APW, and MultiDoses dissolution systems., Pall Acrodisc Syringe Filters with PTFE Membrane, 25 mm “Pall Laboratory products are designed for laboratory applications only.

Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm

Minisart® SRP15 Syringe Filter 17558-----K, 0.2 µm hydrophobic PTFE Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.

Tisch Scientific - Membrane filters, syringe filters, capsule

View PTFE Membrane Filters View Hydrophilic PTFE Membrane Filters View PTFE Syringe Filters View Hydrophilic PTFE Syringe Filters. Regenerated Cellulose (RC) Regenerated Cellulose is a hydrophilic, solvent resistant, low protein binding membrane. R C membrane is ideal for removing particulates from HPLC samples, prior to injection.

Syringe Filters for HPLC/HPLC Mobile Phase Filtration

PTFE Syringe Filters PTFE Syringe Filters are universal filters that are inert to a wide variety of aggressive solvents and strong acids and bases. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. We offer PTFE syringe filters in both their hydrophobic and hydrophilic states.

PTFE Syringe Filter – Membrane Solutions

MS ® PTFE Syringe Filters are Broad chemical compatibility , strong chemical stability and inertia ,strong hydrophobicity , suitable for HPLC filtration. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs.

Whatman™ 10463533 ReZist™ 30 Syringe Filter for HPLC

Whatman™ ReZist™ 30 syringe filters has been specifically designed with excellent chemical resistance against standard organic HPLC solvents. These filters are ideal for the clarification of aggressive organic solvents. ReZist™ 30 syringe filters for HPLC sample preparation feature a hydrophobic PTFE membrane which is laminated with polypropylene for maximum support. These syringe

Whatman Syringe Filter Collection

column, Whatman syringe filters allow unimpeded flow. Without particulates to create obstructions, your column will work more efficiently and last longer. In addition to HPLC, syringe filters have a multitude of other applications. A syringe filter adds a few minutes and a minimal expense to your testing process, but

Syringe Filters | Life Science Research | Merck

How to Choose Right Syringe Filter -- Filter Membrane Materials

Hydrophobic drug adsorption loss to syringe filters from a

Jan 01, 2019 · The current study is focusing on the investigation of hydrophobic drug loss to various syringe filters during HPLC quantitation. 2. Materials and methods2.1. Materials. Eleven types of 13-mm-diameter syringe filters with 0.22 μm pore size were tested with four model drugs. Nine of the filters were purchased from Membrane Solutions (Texas, USA).

Low-extractable Millex Samplicity filters application note

Millex Samplicity® 0.45 µm and 0.20 µm PTFE filters provided very clean extracts without addition of extractable impurities to the samples. When using MS as the detection method, the Millex Samplicity® filters actually provided cleaner extracts than those prepared using a non-EMD Millipore LC-MS-certified syringe filter.

HPLC/GC Approved Syringe Filters - phenomenex.com

Phenex syringe filters are designed for efficient and rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high throughput. Proper membrane and size selection are the keys to choosing the best product to maintain the integrity of your sample components as well as to protect your system from

Mobile Phase Filtration - Analytical QC | Pall Corporation

Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to your analysis. Low API adsorption. 7 Part numbers available

Whatman Syringe & Syringeless Filters - HPLC Accessories

Sterile PTFE Syringe Filter - Autosampler Vial, Hplc Vial

Filter Vials | Thomson Instrument Company

Syringe Filter Built In. Filter Vials are equivalent to a syringe filter built into your HPLC vial. Even a sample that appear clear to the eye potentially have particulates that can clog the machine and cause down time and costly maintenance. Filter Vials increase productivity by eliminating a transfer step required when using a syringe filter.

Syringe Filters | Mandel Scientific

Syringe Filters This extensive line of disposable syringe filters by CELLTREAT® provide efficient filtration of aqueous and organic solutions thanks to a heat seal and luer-locking system and a variety of high-strength filtering membranes.

Inquiry

Send on email.all fields width on * are required. Please enter your question and contact information.we will get back to you as soon as possible!