Free sample hydrophobic ptfe filters for hplc millex
Laboratory Filters | Filtration Products | Waters
The minispike outlet, available on 13 mm PTFE, Nylon, GH Polypro, and PVDF Acrodisc Syringe Filters, allows for easy dispensing into autosampler vials. Membrane Design Typically, the first step in selecting a suitable filter is to choose a membrane that is chemically compatible with the sample (see table below for a full selection of mebranes).
PTFE Syringe Filter - filtration solutions
PTFE membranes are particularly suitable for preparing organic solvent based samples to HPLC analysis. The hydrophobic nature of the membrane also has applications for air and gas sterilization. Good resistant to most acids and alkalis make it to be the best choice for the aggressive solvents, liquids and gases.
Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm
Minisart® SRP15 Syringe Filter 17558-----K, 0.2 µm hydrophobic PTFE Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.
PTFE Syringe Filters, 0.22μm, 25mm, Hydrophobic, Sterile
All the syringe filters are HPLC certified. Hydrophobic PTFE syringe filters have broad chemical compatibility, high pH resistance.. They are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
HPLC Mobile Phase Filtration Kit | Pall Shop
HPLC certification assures that the filters will not add artifacts to your analysis; GH Polypro membrane is the best choice for filtering mobile phases; PTFE membrane provides the ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases “Pall Laboratory products are designed for laboratory applications only.
Wholesales hydrophobic nylon membrane filter for hplc millex
nylon filters supplier Filters Sterile Filtration Fluoropore™ Merane (hydrophobic PTFE) 25 0.20 FG nylon Merane with Glass Fiber Pre-filter 25 0.20 GN 100 mL . 250 µL Male Luer slip 50 SLGNM25NS 1000 SLGNM25NK 0.45 HN 100 mL 250 µL Male Luer slip 50 SLHNM25NS 200 (8 x 25) SLHNMZ5NZ
Syringe Filters for HPLC & Sample Preparation | analytics
Permanently hydrophobic filter material, perfectly applicable for air and gas as well as non-polar liquids. PTFE membranes are characterized by an extraordinary chemical resistance versus nearly all chemicals and are suited for both filtration of acids or aggressive solvents and particle filtration of air or water samples up to 200° C.
PTFE (Polytetrafluoroethylene) Membrane Filters
PTFE filters are the versatile choice for size-selective samplers. The material’s unique properties make it ideal for gravimetric, chemical, and/or microscopic analysis of sample particulate. PTFE filters are used for aerosol sampling, air venting and gas filtration. Note that the back pressure on PTFE filters can vary within the same lot.
Hydrophobic Ptfe Membrane Filters at Thomas Scientific
Hydrophobic PTFE filters have excellent solvent resistance and are ideal for HPLC sample preparation. Easy to Identify The color-coded band on the Millex housing clearly indicates which membrane is inside. Automated, Compliant Manufacturing Process The 13 mm Millex filter Related Products: Sterile Ptfe Filter
Syringe Filters - Fisher Scientific
Fisher Scientific SAS - Boulevard Sébastien Brant - F67403 Illkirch Cedex - France Tél. 03 88 67 14 14 - Fax. 03 88 67 11 68 - fr.fisher@thermofisher.com
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS ITEM WILL BE REPLACED BY SLCR033NB Replaced by SLCR033NB, 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.
HPLC Syringe Filter, Nylon/Hydrophilic PVDF Syringe Filter
1) For our first cooperation, free samples will be provide buyer afford the shipping cost. 2) For our old customers, we will send free samples, even though new design samples, when have stocks. 3) Samples delivery date is 24 to 48 hours, if have stocks. Customer design is about 3-7 days.
Millex Syringe Filter Unit, Hydrophilic PTFE, Non-sterile
Millex Syringe Filter Unit, Hydrophilic PTFE, Non-sterile Replaces SLLGH13NL, 0.20 µm pore size, 13 mm diameter, Millex-LG hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.
Filter Vials | Thomson Instrument Company
Method: A. Water B. ACN 45-90% with .05% TFA Ballistic Gradient over 1.4 minutes using Waters® Acquity® UPLC Thomson Filter Vial (patented) Part # 35540-500 Filter Vial 0.45µM hydrophobic PTFE, w/ Pre-Slit Cap Millipore Syringe Filter Part #:SLFHR04NL Millex-FH® Filter, 0.45M, hydrophobic PTFE, 4mm, non-sterile.
Nonsterile Millex® Syringe Filters | Sigma-Aldrich
Prepare samples using low-extractable Millex ® syringe filters to ensure clean baselines and maximize instrument uptime for sensitive analyses, such as dissolution testing, LC-MS, UHPLC, and ion chromatography.