Free sample non sterile ptfe filters for hplc pall
Phenomenex Filtration Part: Phenex™ Filter Membranes, Teflon
PTFE is an inherently hydrophobic membrane excellent for filtration of organic-based, highly acidic or basic samples and solvents. Widely used in chromatography, it is especially well suited for the clarification of non-aqueous samples.
Syringe Air Filter at Thomas Scientific
Thermo Scientific Nalgene. Filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC with the Thermo Scientific™ Nalgene™ 50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent barrier for sterile venting of.
Ptfe Hydrophilic Syringe Filters at Thomas Scientific
Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm. PerkinElmer. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample
HPLC & UHPLC Sample Preparation - Laboratory | Pall Corporation
More retentive filters will also remove smaller non-dissolved particles that may rest on the head of your HPLC column and affect your analytical results as they dissolve during an analysis. The graph in the PDF below demonstrates that the life of an HPLC column can be extended up to 46 times by filter samples prior to injection.
Syringe Filters - Non Sterile Syringe Filters - Wyvern Scientific
National Scientific F2500-1. Titan 44526-NN. $174.34. 30%. Add to Cart. Nylon syringe filters offer universal application for analytical procedures. Hydrophilic Nylon is ideal for aqueous (non-acidic) or organic sample prep and HPLC, GC or dissolution sample analysis. With its excellent flow characteristics, very low extractable levels and
Non-Sterile Syringe at Thomas Scientific
Non-Sterile Syringe Filters. Thermo Scientific Nalgene. Non-sterile syringe filters for filtration, clarification or particle removal from buffers, reagents, DMSO, HPLC/GC solvents. SFCA – Use for immunological samples and biological fluids CA – Ideal for buffers, aqueous reagents and solutions, including EIA and ELISA samples .
PTFE Syringe Filters, 0.45μm, 25mm, Hydrophobic, Non-sterile
Pall 4219. Filters/Pack. 100. Price/Filter. $1.40. Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.
Syringe Filter 0.2 at Thomas Scientific
Quick and efficient sample filtration HPLC sample preparation Sterile isolation Autoclavable at 121°C Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for maximum sample recovery.
Acrodisc® 13 mm Syringe Filter, 0.45 µm, 300/cs | Pall Shop
Acrodisc® Syringe Filter with PTFE Membrane - 0.45 µm, 13mm, minispike outlet (100/pkg 300/cs) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.
Acrodisc® 13 mm Syringe Filter, 0.2 µm PTFE - Pall Shop
Pall 13 mm Acrodisc syringe filters are available with a standard male slip luer outlet or Pall’s proprietary minispike outlet. The minispike allows for easy handling with a HPLC vial, and offers a reduced hold-up volume, ensuring maximum filtrate recovery. Typical hold-up volumes: 13 mm, male slip luer outlet: 30 μm 13 mm, minispike: 14 μm
Acrodisc® Syringe Filters with PTFE Membrane - pall.com
Sterilization of 25 mm Filters Provided non-sterile. If desired, autoclave at 121- 123 °C (250 - 253 °F) at 1.0 bar (100 kPa, 15 psi) for a maximum of 15 min. Related Products 47 mm Filter Funnels, Glass AcroPrep™ 24 Filtration System HPLC Mobile Phase Filtration Membranes SolVac® Filter Holder Stainless Steel Forceps Vacuum/Pressure Pumps
PTFE Syringe Filters - Non-Sterile Syringe Filters - Pall Shop
PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-Sterile Syringe Filters
wwPTFE Syringe Filters - Non-Sterile Syringe Filters - Pall
Pall Corporation is a filtration, separation and purification leader providing solutions to meet the critical fluid management needs of customers across the broad spectrum of life sciences and industry. Pall works with customers to advance health, safety and environmentally responsible technologies.
hydrophobic 0.22 um ptfe syringe filter for venting-Voa Vial
PTFE Syringe Filters - Non-Sterile Syringe Filters PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-Sterile Syringe Filters Pall Corporation is a filtration, separation and purification leader providing solutions to meet the critical fluid management needs of customers across the broad spectrum
Acrodisc 13mm Syringe Filter, 0.2µm PTFE - shop.pall.co.uk
Pall 13 mm Acrodisc syringe filters are available with a standard male slip luer outlet or Pall’s proprietary minispike outlet. The minispike allows for easy handling with a HPLC vial, and offers a reduced hold-up volume, ensuring maximum filtrate recovery. Typical hold-up volumes: 13 mm, male slip luer outlet: < 30 μm.