High quality 0.45 um ptfe syringe filter for hplc acrodisc
Celltreat PVDF Syringe Filters 0.45 um 30 mm ⋆ Morganville
High quality cost saving equivalent replacement for Whatman Puradisc™ (Cat # 6746-2504 and 6747-2504), Millipore Millex® or Pall Acrodisc® syringe filters. Use syringe filters to filter aqueous solutions for HPLC, buffers or salt solutions, tissue culture media or biological samples, for example.
Acrodisc® syringe filters Nylon membrane, diam. 13 mm, pore
These offer high quality filtration for analytical samples. Certified for HPLC to ensure low extractables. Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume.
Syringe filters, Acrodisc®, PTFE | VWR
Syringe filters, Acrodisc®, PTFE. Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables. The GxF version provides two to four times the throughput of standard
Syringe Filters for HPLC and sample preparation | analytics
Regenerated cellulose membranes are solvent resistent and hydrophilic. 0.45 µm pore sizes are mainly used for HPLC sample preparation. This membrane type is resistent versus most solvents, as well as aqueous solutions with a pH from 3 to 12 and temperature stable up to 200° C.
Labexact Sterile CA Syringe Filters, 0.45(um), 25(mm), 100 pack
HPLC Certified High quality and cost effective syringe filters are available in a broad range of membrane
Celltreat PTFE Syringe Filters 0.45 um 30 mm ⋆ Morganville
Celltreat PTFE syringe filter, 0.45 um pore size, 30 mm diameter. Celltreat Scientific brand polytetrafluoroethylene (PTFE) syringe filters. Available individually packed sterile, 30/pack, or bulk packed non-sterile, 100/pack. Low hold up volume, allowing for high sample recovery. Heat-sealed, not glued, polypropylene housing.
Acrodisc® syringe filters PTFE membrane, diam. 25 mm, pore
General description. These offer high quality filtration for analytical samples. Certified for HPLC to ensure low extractables. Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume.
Acrodisc® PSF Syringe Filters, 25 mm, Pall Laboratory | VWR
Acrodisc® PSF Syringe Filters, 25 mm, Pall Laboratory. The new Acrodisc® One and Acrodisc® PSF premium syringe filters combine the benefits of a multi-layered prefiltration device with an automation-certified filter housing. Accurate analysis. HPLC certified for low levels of UV-absorbing extractables.
Pall Acrodisc Syringe Filters
Acrodisc Syringe Filter Products Non-Sterile Acrodisc Syringe Filters Pall Laboratory offers a comprehensive line of non-sterile syringe filters with five membrane types and two application-specific types: wwPTFE Nylon PTFE IC and Supor ® Versapor Pore sizes range from 0.2 µm to 1 µm to accommodate almost all applications.
Shop Acrodisc Syringe Filter PTFE | WAT200820 | Waters
Acrodisc, Syringe Filter, PTFE, 25 mm, 0.45 µm, Non polar, 1000/case. Use the Acrodisc, Syringe Filter, PTFE for the extraction and filtration of aggressive solvents and organics. The lab equipment offers high-quality filtration for analytical samples and is certified for HPLC to ensure low extractables.
Sterile 25 Mm Syringe Filters at Thomas Scientific
An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in
Syringe Filters for HPLC & Sample Preparation | analytics
Pore Sizes and Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.
Celltreat PES Syringe Filters 0.45 um 13 mm ⋆ Morganville
High quality cost saving equivalent replacement for Whatman Puradisc™, Millipore Millex® or Pall Acrodisc® sterile syringe filters. Use syringe filters to filter aqueous solutions for HPLC, buffers or salt solutions, tissue culture media or biological samples, for example. Other syringe filter types available include polyvinylidene (PVDF
The Acrodisc One™ Syringe Filter Compared to Syringe Filters
0.45 µm Pall Acrodisc One syringe filter, and utilizing inline filtration within the instrument. Without filtration, particles present in the sample can cause higher system pressures, shifted retention times, poor peak shape and separation. Acrodisc One Syringe Filters with wwPTFE Membrane and Syringe Filters with
Spectrum PTFE Syringe Filters | | 315061 | Spectrum Chemical
High quality and cost effective, these Polytetrafluoroethylene (PTFE) syringe filters are HPLC certified and available in both a hydrophilic and hydrophobic version. • PTFE membranes are inherently hydrophobic; they are ideal for the filtration of nonpolar liquids and gases. • Very resistant to solvents as well as acids or bases. • Can be