High quality hydrophobic ptfe filters for hplc sigma

Syringe Filters With Prefilter - China HPLC Consumables

33mm,0.22um Hydrophobic PTFE Syringe Filter With Prefilter For Lab Use Introduction PTFE syringe filter provides high flow rate, best chemical compatibility and low protein binding, ideal for aqueous solutions and solvents filtration, especially aggressive solvent as well as air filtration. Application In addition to HPLC, syringe filters have a

Syringe Filters for HPLC and sample preparation | analytics

Permanently hydrophobic filter material, perfectly applicable for air and gas as well as non-polar liquids. PTFE membranes are characterised by an extraordinary chemical resistance versus nearly all chemicals and are suited for both filtration of acids or aggressive solvents and particle filtration of air or water samples up to 200° C.

PTFE Syringe Filters, 0.22μm, 25mm, Hydrophobic, Non-sterile

Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.

HPLC Filter Degasser | Safety Products | MilliporeSigma

Note: The filters used with the unit are pure PTFE and can be used with all organic solvents. The hydrophobic properties of PTFE give a high initial drop across the filter when used with aqueous solvents. The pressure drop can be greatly reduced by prewetting the filter with a compatible organic solvent.

Fluoropore™, Mitex™, LCR and Omnipore™ Membrane Filters

Hydrophobic PTFE membrane bonded to a high density polyethylene support - Find MSDS or SDS, a COA, data sheets and more information.

PTFE Syringe Filters, Hydrophobic, 100/PK | MASTELF

PTFE Syringe Filters, Hydrophobic, 100/PK » » 13mm, 25mm, 0.22 um filter, 0.45 um filter, Sterile Syringes Filters, PVDF, NYLON, PES Available !

Sterile Hydrophobic PTFE Syringe Filters, Choose Size, pack/100

Sterile Hydrophobic PTFE Syringe Filters. We offer HPLC Certified, high quality and cost effective syringe filters. These polytetrafluoroethylene PTFE syringe filters are available in two different porosities 0.45 µm and 0.22 µm and two diameters 25mm and 13mm. We offer them with a prefilter or without in glass fiber or polypropylene as well

Hydrophilic Ptfe Membrane Filter at Thomas Scientific

of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in Fine particle removal

MilliporeSigma SLFHX13NL Millex® FH Overmold Design Syringe

Millex® FH Hydrophobic PTFE syringe filters have excellent solvent resistance and are ideal for HPLC sample preparation; The overmolded housing design provides a more robust syringe filter, with a maximum housing pressure of 150 psig (10 bar) enabling solutions to be filtered faster

EZFlow Non-Sterile Hydrophilic PTFE Syringe Filters, 0.22um

Low Cost Syringe Filters Without Compromising Quality EZFlow 13mm, 25mm, and 33mm sample prep syringe filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC.

Whatman™ 10463503 ReZist™ 30 Syringe Filter for HPLC

These filters are ideal for the clarification of aggressive organic solvents. ReZist™ 30 syringe filters for HPLC sample preparation feature a hydrophobic PTFE membrane which is laminated with polypropylene for maximum support. These syringe filters have a 1µm membrane for pre-filtration of high solid content solutions.

PTFE Syringe Filters, 0.45μm, 25mm, Hydrophobic, Non-sterile

Hydrophobic PTFE syringe filters have broad chemical compatibility, high pH resistance.. They are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The Pure polypropylene housings are color-coded and available in smooth rim or gear rim formats.

TLD Polytetrafluoroethylene (PTFE) Hydrophobic Syringe

TLD Polytetrafluoroethylene (PTFE) Hydrophobic Syringe Filters - Sterile HPLC Certified High quality and cost effective syringe filters are available in a broad range of membrane materials with sterile and non-sterile packaging options.

13mm 0.22um Hydrophilic Ptfe Polypropylene Syringe Filter For

13mm 0.22um Hydrophilic Ptfe Polypropylene Syringe Filter For Hplc Vial , Find Complete Details about 13mm 0.22um Hydrophilic Ptfe Polypropylene Syringe Filter For Hplc Vial,13mm 0.22um Hydrophilic Ptfe Syringe Filter,Hydrophilic Polypropylene Syringe Filter,Syringe Filter For Hplc Vial from Other Lab Supplies Supplier or Manufacturer-Zhejiang Aijiren Technologies Co., Ltd.

LCR Membrane Filter | FHLC02500

LCR Membrane Filter: Background Information: LCR membrane is an unsupported, hydrophilic PTFE membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractabes, ensuring that it will not add anything to your HPLC solvents, providing clearer analysis results.