High quality non sterile ptfe filters for hplc millex
Celltreat Nylon Syringe Filters 0.22 um 30 mm ⋆ Morganville
High quality cost saving equivalent replacement for Whatman Puradisc™ (Cat # 6750-2502 and 6751-2502), Millipore Millex® or Pall Acrodisc® syringe filters. Use syringe filters to filter aqueous solutions for HPLC, buffers or salt solutions, tissue culture media or biological samples, for example.
Syringe Filters | AAPPTec
Filter Type: Non-sterile Membrane Selection: Nylon-66, PVDF, Polypropylene, PES, PTFE, RC, CA, M.E. Cellulose , Nitrocellulose, Glass Microfiber, Membrane Filters Pore Size: 0.45 μm for most HPLC applications; 0.20 μm to eliminate all bacterial contaminants and when 3 μm HPLC columns are used
Millex® Syringe Filters | Sigma-Aldrich
Millex® syringe filters are available as sterile syringe filters or nonsterile syringe filters. Produced with Millipore® membranes, including PES, PVDF, PTFE, and Durapore® membranes, Millex® syringe filters are available as hydrophobic filters and hydrophilic filters in a variety of pore sizes, including common pore sizes 0.2 μm, 0.22 μm, and 0.45 μm.
Non-Sterile Millex® Syringe Filter Selection Guide
Non-sterile Millex® Syringe Filter with Fluoropore™ (Hydrophobic PTFE) Membrane Excellent solvent resistance HDPE 4 1 mL (≤10 µL) 0.20 155 0.45 Polypropylene 13 10 mL (≤ 15 µL) 0.20 0.45 HDPE 25 100 mL (≤ 100 µL) 0.20 0.45 5.0 Non-sterile Millex® Syringe Filters with MCE Membrane General purpose filtration
MilliporeSigma Non-Sterile Millex Syringe Filter - Filtration
Millex™-LG, LCR filters contain hydrophilic PTFE membranes and are HPLC-certified for low levels of UV-absorbing extractables. Hydrophilic PTFE membranes have broad chemical compatibility, enabling filtration of aqueous and organic solvents. 33 mm hydrophilic PTFE Millex™ filters have faster flow rates than 25 mm filters.
Non-Sterile Syringe Filters - Pall Corporation
During dissolution testing, non-sterile syringe filters are essential to remove undissolved particulates from a drug sample before analysis by high-pressure liquid chromatography (HPLC). Since dissolution testing mimics the process of drug absorption in the human body, these particles must be filtered so the HPLC instrument will provide
The Lab Depot | TLD Polytetrafluoroethylene (PTFE
HPLC Certified High quality and cost effective syringe filters are available in a broad range of membrane materials with sterile and non-sterile packaging options. Features: & Benefits: Disposable. Luer-Lok and pressure fitting. Ultrasonically bonded for reliability. Filter media type clearly inscribed on barrel.
Buy Laboratory Syringe Filters Online | Southern Labware
High quality and HPLC certified syringe filters are available in a broad range of membrane materials with sterile and non-sterile packaging options. Features: Disposable. Luer-Lok™ and pressure fitting. Ultrasonically bonded for reliability. Filter media type clearly inscribed on barrel.
Membranes for Filtration
Bottle Tops and Filter Units; Extraction Thimbles; Filter Holders and Hardware; Filter Paper; Filtering Funnels; Food and Beverage Testing; Glass Fiber Filters and Prefilters; Membranes for Filtration; Syringe and Syringeless Filters; Water Testing and Environmental Analysis
HPLC Syringe Filter for Filtering Samples by Aijiren
These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. We provide PTFE syringe filters in hydrophobic and hydrophilic states. The Syringe Filters produced by Aijiren Tech are a complete range of non-sterile disposable syringe filters for reliable sample preparation.
Millipore SLFHR04NL PTFE Hydrophobic Millex-FH Non-Sterile
An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. Choose from a wide variety of membranes to meet all your sample preparation needs. Chromatography including LC, GC, HPLC, and UHPLC. Dissolution testing. General particulate
Syringe filters, Millex® | VWR
Syringe filters with hydrophobic PVDF/PTFE membrane. Used in vacuum line protection, transducer protection and gas filtration. Available as either 25 mm or pump-driven Millex®-FG₅₀ 50 mm diameter filters.
Sterile PTFE Syringe Filter - Autosampler Vial, Hplc Vial
The pre-filter membrane layer can keep big particles on the first layer, which improves the filter efficiency. The ultrasonic welding technique makes sure the air tightness of syringe filters. Now Aijiren has a manufacturing plant covering 10,000 square meters area, including 5,000 square meters 100,000 grade cleaning rooms.
Membranes for Filtration - Fisher Sci
Bottle Tops and Filter Units; Extraction Thimbles; Filter Holders and Hardware; Filter Paper; Filtering Funnels; Food and Beverage Testing; Glass Fiber Filters and Prefilters; Membranes for Filtration; Syringe and Syringeless Filters; Water Testing and Environmental Analysis
Antibodies & Protein Biology - Fisher Sci
MilliporeSigma™ Millex Samplicity™ Filters, Hydrophilic PTFE To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.
Millex-FH Filter, 0.45 µm | SLFH05000
Millex-FH Filter, 0.45 µm A 50 mm diameter non-sterile syringe filter with a 0.45 µm pore size hydrophobic PTFE membrane. Comes in a pack of 100. - Find MSDS or SDS, a COA, data sheets and more information.
China HPLC Consumables Manufacturers - HPLC Consumables
13/25/33mm 0.22/0.45um Nylon66 PES PTFE PVDF RC CA GF Syringe Filters Introduction Syringe filters are a cost-effective way to improve the quality of HPLC analysis, improve consistency, extend column life and reduce maintenance. By removing particulates before the sample enters the column, Navigator syringe filters allow unimpeded flow. Without
Millipore SLFGR04NL PTFE Hydrophobic Millex-FG Non-Sterile
An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. Choose from a wide variety of membranes to meet all your sample preparation needs. Chromatography including LC, GC, HPLC, and UHPLC. Dissolution testing. General particulate
Celltreat PTFE Syringe Filters 0.45 um 30 mm ⋆ Morganville
Available individually packed sterile, 30/pack, or bulk packed non-sterile, 100/pack. Low hold up volume, allowing for high sample recovery. Heat-sealed, not glued, polypropylene housing. High quality cost saving equivalent replacement for Whatman Puradisc™ (Cat # 6784-2504), Millipore Millex® or Pall Acrodisc® syringe filters.
Syringe Filters for HPLC and sample preparation | analytics
Pore Sizes and Pore Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are usually for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.
Millipore SLFH025NB PTFE Hydrophobic Millex-FH Non-Sterile
An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. Choose from a wide variety of membranes to meet all your sample preparation needs. Chromatography including LC, GC, HPLC, and UHPLC. Dissolution testing. General particulate
Filtration - Fisher Sci
Fisher Scientific Italia, Strada Rivoltana Km 4, 20053 Rodano (MI), Italy Tel. 02 950 59 478 - Fax. 02 950 59 479 - it.fisher@thermofisher.com
Syringe Filters - Pall Corporation
During dissolution testing, non-sterile syringe filters are essential to remove undissolved particulates from a drug sample before analysis by high-pressure liquid chromatography (HPLC). Since dissolution testing mimics the process of drug absorption in the human body, these particles must be filtered so the HPLC instrument will provide
Non-Sterile Millex® Syringe Filter Selection Guide
Non-sterile Millex® Syringe Filter with Fluoropore™ (Hydrophobic PTFE) Membrane Excellent solvent resistance HDPE 4 1 mL (≤10 µL) 0.20 155 0.45 Polypropylene 13 10 mL (≤ 15 µL) 0.20 0.45 HDPE 25 100 mL (≤ 100 µL) 0.20 0.45 5.0 Non-sterile Millex® Syringe Filters with MCE Membrane General purpose filtration
Quick Reference Guide Millex Syringe Filters
• Millex-LCR filter contains a Millipore-exclusive hydrophilic PTFE membrane and are HPLC-certified for low levels of UV-absorbing extractables. They provide the cleanest sample for HPLC analysis. • Durapore® (PVDF) filters combine fast flow with low protein binding. • Nylon filters provide broad chemical compatibility
Millex Syringe Filters - SOMATCO
using an automated process. Sterile devices are provided with a Certificate of Quality. Faster Flow Rate 33 mm Millex filters have 20% more filter surface than 25 mm filters for significantly higher flow rate and throughput. Higher Operating Pressure With a maximum housing pressure of 150 psig (10 bar) solutions can be filtered faster.
Syringe Filters for HPLC & Sample Preparation | analytics
Pore Sizes and Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.
Simsii Syringe Filter | Non Sterile Syringe Filter
With our high-quality manufacturing procedures and 100% integrity testing, we ensure superior filtration offered by our non-sterile syringe filters. These filters can maximize the uptime of your instrument in the critical analysis like UHPLC, LC-MS, ion chromatography, and dissolution testing.
Laboratory Filtration Solutions and Equipment | Sterlitech
Our range of membrane, syringe, and capsule filters represent the industry’s highest quality manufacturing standards, product performance, and application support for laboratory-scale filtration. Reduce process times, increase analytical efficiency and produce consistent, measurable results today with our filtration devices.
Syringe Filters | VWR
Description: Low protein binding filters for sterile filtration of biological samples, serum and cell culture media. ,514-4131EA,514-4123EA,514-4130EA,PALL4672EA,514-4119EA,514-4133EA,514-4136EA Syringe filters , Acrodisc® Versapor®