hplc 25mm pes syringe filter

Non-Sterile Syringe Filters - Pall Corporation

Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL See All Attributes Add to Quote In stock 4 available Check Availablity $ 302.94 / PAC Add to Cart Acrodisc® Syringe Filter - 0.8 µm with Versapor membrane, polypropylene housing (50/pkg 200/cs) Product ID AP-4189

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Acrodisc® 25 mm Syringe Filter, 0.45 µm PTFE Membrane, 1000

25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets

Syringe Filters - Sigma-Aldrich

For batch-to-batch consistency, these filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 210 and 254 nm with water, methanol, and acetonitrile. Whatman ® Roby syringe filters are designed specifically for automated filtration systems.

High Quality Specialty Syringe Filters | I.W. Tremont

HPLC Certified. High quality and cost effective syringe filters are Sterile PES Syringe Filters, 0.45(μm), 25(mm), GF prefilter, 100 pack: IWT-ES10310:

PES Syringe Filter, iPure™ brand, 0.22µm, 25mm housing

25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.

Acrodisc® Syringe Filters, 25 mm, Pall Laboratory | VWR

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

Millex® Syringe Filters - Sigma-Aldrich

10-100 mL: 25 mm, 33 mm Sterile Millex ® Syringe Filters Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore Express ® PLUS polyethersulfone (PES) membrane

PES Syringe Filters - Pall Corporation

Acrodisc® Syringe Filter with Supor® Membrane - 0.8/0.2 µm, 25 mm modified acrylic housing (1000/pkg) Product ID 4504 Unit of Measure 1/PAC Min Order Qty 1 Pore Size 0.8/0.2 µm µm nominal Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Polyethersulfone (PES) Hold-Up Volume <300 µL Housing Material Modified acrylic

HPLC prep—which filter fits your chromatography sample best?

Jul 11, 2017 · HPLC prep using a stacked syringe filter. Syringe filtration often involves aspirating the sample, fitting a particle filter, and filtering into an autosampler vial. The vial is finally capped and transferred to an autosampler. This filtration process can be repeated dozens of time a day, depending on your laboratory workflow and HPLC capacity.

Syringe Filters | Thermo Fisher Scientific - US

Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.

Syringe Filters - Pall Corporation

For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2.

HPLC Syringe Filter - Hplc Vials

25mm Syringe Filter for Sale 1. Diameter: 25mm 2.Membrane: PTFE, PVDF, PES, MCE, NYLON, PP, CA, etc. 3.Pore Size: 0.22um / 0.45um 4.House Material: PP 5. Sample volume: < 100ml 6. Filter area: 4.3cm2 7. Dead volume: <100ul Get Price Details 13mm Syringe Filters Wholesale 1. Diameter: 13mm 2.Membrane: PTFE, PVDF, PES, MCE, NYLON, PP, CA, etc.

Whatman Puradisc 25 syringe filters 0.2 um, PES sterile- pack

Whatman® Puradisc 25 syringe filters 0.45 μm, PES sterile, 50/pk View Price and Availability Z741696 Nalgene® syringe filter units, disposable, polyethersulfone (PES) membrane pore size 0.2 μm, diam. 13 mm View Price and Availability CLS431212 Corning® syringe filters regenerated cellulose membrane, diam. 4 mm, pore size 0.2 μm

Choice™ PVDF (Hydrophilic) Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 13 mm, 100 Pk.

Thermo Scientific™ Nalgene™ Sterile Syringe Filters

Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features. 10 to 100mL

High Quality Specialty Syringe Filters | I.W. Tremont

HPLC Certified. High quality and cost effective syringe filters are Sterile PES Syringe Filters, 0.45(μm), 25(mm), GF prefilter, 100 pack: IWT-ES10310:

25 mm, 0.45 µm, Acrodisc® Syringe Filter, 1000/pkg | Pall Shop

Buy online Acrodisc® 25 mm syringe filters, pore size 0.45 µm, from Pall laboratory products - used in HPLC/UHPLC sample preparation applications. These filters come with a maximum operating pressure of 5.2 bar at 55 °C.

Syringe Filters - Pall Corporation

For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2.

Syringe Filters | Thermo Fisher Scientific - US

Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.

Millex® Syringe Filters - Sigma-Aldrich

10-100 mL: 25 mm, 33 mm Sterile Millex ® Syringe Filters Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore Express ® PLUS polyethersulfone (PES) membrane

PES Syringe Filter, iPure™ brand, 0.22µm, 25mm housing

25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.

Acrodisc® Syringe Filters, 25 mm, Pall Laboratory | VWR

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

Syringe Filters - Sigma-Aldrich

For batch-to-batch consistency, these filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 210 and 254 nm with water, methanol, and acetonitrile. Whatman ® Roby syringe filters are designed specifically for automated filtration systems.

HPLC prep—which filter fits your chromatography sample best?

Jul 11, 2017 · HPLC prep using a stacked syringe filter. Syringe filtration often involves aspirating the sample, fitting a particle filter, and filtering into an autosampler vial. The vial is finally capped and transferred to an autosampler. This filtration process can be repeated dozens of time a day, depending on your laboratory workflow and HPLC capacity.

Non-Sterile Syringe Filters - Pall Corporation

Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL See All Attributes Add to Quote In stock 4 available Check Availablity $ 302.94 / PAC Add to Cart Acrodisc® Syringe Filter - 0.8 µm with Versapor membrane, polypropylene housing (50/pkg 200/cs) Product ID AP-4189

Acrodisc® 25 mm Syringe Filter, 0.45 µm PTFE Membrane, 1000

25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Acrodisc® 25 mm Syringe Filter, 0.2 µm PTFE Membrane, 200/cs

Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4225 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 858.92 / CV. Add to Cart. Add to Quote.

Choice™ PVDF (Hydrophilic) Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 13 mm, 100 Pk.

Choice™ PES (Polyethersulfone) Syringe Filters

Choice PES Syringe Filters Specifications Membrane: HPLC certified Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Choice PES Syringe Filter Applications IC sample preparation and analysis Dissolution testing Chemical Incompatibilities

Whatman Puradisc 25 syringe filters 0.2 um, PES sterile- pack

Whatman® Puradisc 25 syringe filters 0.45 μm, PES sterile, 50/pk View Price and Availability Z741696 Nalgene® syringe filter units, disposable, polyethersulfone (PES) membrane pore size 0.2 μm, diam. 13 mm View Price and Availability CLS431212 Corning® syringe filters regenerated cellulose membrane, diam. 4 mm, pore size 0.2 μm

Syringe Filter PES with Outer Ring - Hplc Vials

PES syringe filters are made of PES membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. Details Applications: • HPLC aqueous sample preparation • Biological sample preparation • Basic analytical testing • Food and beverage • Pharmaceutical • Environmental monitoring

Choice™ PVDF (Hydrophilic) Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 13 mm, 100 Pk.

Acrodisc® 25 mm Syringe Filter with 0.2 µm PVDF Membrane

Acrodisc® Syringe Filters with PVDF Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4406 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 829.22 / CV. Add to Quote. For any queries, please click on the below Submit a Question option. In stock 75 available Check Availablity.

Non-Sterile Syringe Filters - Pall Corporation

Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL See All Attributes Add to Quote In stock 4 available Check Availablity $ 302.94 / PAC Add to Cart Acrodisc® Syringe Filter - 0.8 µm with Versapor membrane, polypropylene housing (50/pkg 200/cs) Product ID AP-4189

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Acrodisc® 25 mm Syringe Filter, 0.45 µm PTFE Membrane, 1000

25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets

Thermo Scientific™ Nalgene™ Sterile Syringe Filters

Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features. 10 to 100mL

PES Syringe Filter, iPure™ brand, 0.22µm, 25mm housing

25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.

HPLC Syringe Filter - Hplc Vials

Non-sterile Disposable Syringe Filter Syringe Filter PTFE for HPLC Syringe Filter Nylon for Laboratory Syringe Filter PVDF for Sale Sterile Syringe Filters Wholesale Syringe Filter MCE for Lab Use 0.22μm Pore Syringe Filters for Sale 25mm Syringe Filter for Sale 13mm Syringe Filters Wholesale 0.45μm Syringe Filtre Wholesale Price

Acrodisc® Syringe Filters, 25 mm, Pall Laboratory | VWR

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

PES Syringe Filters - Pall Corporation

Acrodisc® Syringe Filter with Supor® Membrane - 0.8/0.2 µm, 25 mm modified acrylic housing (1000/pkg) Product ID 4504 Unit of Measure 1/PAC Min Order Qty 1 Pore Size 0.8/0.2 µm µm nominal Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Polyethersulfone (PES) Hold-Up Volume <300 µL Housing Material Modified acrylic

Syringe Filters - Pall Corporation

For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2.

Acrodisc® 25 mm Syringe Filter, 0.2 µm PTFE Membrane, 200/cs

Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4225 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 858.92 / CV. Add to Cart. Add to Quote.

Acrodisc® 25 mm Syringe Filter with 0.2 µm PVDF Membrane

Acrodisc® Syringe Filters with PVDF Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4406 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 829.22 / CV. Add to Quote. For any queries, please click on the below Submit a Question option. In stock 75 available Check Availablity.

High Quality Specialty Syringe Filters | I.W. Tremont

HPLC Certified. High quality and cost effective syringe filters are Sterile PES Syringe Filters, 0.45(μm), 25(mm), GF prefilter, 100 pack: IWT-ES10310:

Acrodisc® 25 mm Syringe Filter, 0.45 µm PTFE Membrane, 1000

25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets

HPLC prep—which filter fits your chromatography sample best?

Jul 11, 2017 · HPLC prep using a stacked syringe filter. Syringe filtration often involves aspirating the sample, fitting a particle filter, and filtering into an autosampler vial. The vial is finally capped and transferred to an autosampler. This filtration process can be repeated dozens of time a day, depending on your laboratory workflow and HPLC capacity.

Syringe Filters - Pall Corporation

For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2.

Corning Filtration Guide

Syringe/Disc Filters The smaller conventional Corning® syringe disc-type filters (4, 15, 25, 26, and 28 mm diameter) are used with syringes which serves as both the fluid reservoir and the pressure source. They are 100% integrity tested. The HPLC-certified non-sterile syringe filters are available with nylon, regenerated

Thermo Scientific™ Nalgene™ Sterile Syringe Filters

Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features. 10 to 100mL

Acrodisc® Syringe Filters, 25 mm, Pall Laboratory | VWR

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

Syringe Filters - Sigma-Aldrich

For batch-to-batch consistency, these filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 210 and 254 nm with water, methanol, and acetonitrile. Whatman ® Roby syringe filters are designed specifically for automated filtration systems.

25 mm, 0.45 µm, Acrodisc® Syringe Filter, 1000/pkg | Pall Shop

Buy online Acrodisc® 25 mm syringe filters, pore size 0.45 µm, from Pall laboratory products - used in HPLC/UHPLC sample preparation applications. These filters come with a maximum operating pressure of 5.2 bar at 55 °C.

Non-Sterile Syringe Filters - Pall Corporation

Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL See All Attributes Add to Quote In stock 4 available Check Availablity $ 302.94 / PAC Add to Cart Acrodisc® Syringe Filter - 0.8 µm with Versapor membrane, polypropylene housing (50/pkg 200/cs) Product ID AP-4189

Syringe Filters | Thermo Fisher Scientific - US

Titan3 Premium Syringe Filters Target2 Routine Syringe Filters Choice Basic Syringe Filters; Range of filter sizes: 4mm to 30mm: 4mm to 30mm: 13mm to 25mm: High-quality filtration solutions : Low extractable membranes and housing : Plain polypropylene housing : HPLC performance tested : Enhanced Luer Lock inlet which provides secure attachment

Choice™ PES (Polyethersulfone) Syringe Filters

Choice PES Syringe Filters Specifications Membrane: HPLC certified Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Choice PES Syringe Filter Applications IC sample preparation and analysis Dissolution testing Chemical Incompatibilities

PES Syringe Filter, iPure™ brand, 0.22µm, 25mm housing

25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.

Choice™ PVDF (Hydrophilic) Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 13 mm, 100 Pk.

High Quality Specialty Syringe Filters | I.W. Tremont

HPLC Certified. High quality and cost effective syringe filters are Sterile PES Syringe Filters, 0.45(μm), 25(mm), GF prefilter, 100 pack: IWT-ES10310:

Syringe Filters - Sigma-Aldrich

For batch-to-batch consistency, these filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 210 and 254 nm with water, methanol, and acetonitrile. Whatman ® Roby syringe filters are designed specifically for automated filtration systems.

Millex® Syringe Filters - Sigma-Aldrich

10-100 mL: 25 mm, 33 mm Sterile Millex ® Syringe Filters Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore Express ® PLUS polyethersulfone (PES) membrane

Syringe Filters | Thermo Fisher Scientific - US

Titan3 Premium Syringe Filters Target2 Routine Syringe Filters Choice Basic Syringe Filters; Range of filter sizes: 4mm to 30mm: 4mm to 30mm: 13mm to 25mm: High-quality filtration solutions : Low extractable membranes and housing : Plain polypropylene housing : HPLC performance tested : Enhanced Luer Lock inlet which provides secure attachment

Choice™ PES (Polyethersulfone) Syringe Filters

Choice PES Syringe Filters Specifications Membrane: HPLC certified Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Choice PES Syringe Filter Applications IC sample preparation and analysis Dissolution testing Chemical Incompatibilities

Acrodisc® 25 mm Syringe Filter, 0.45 µm PTFE Membrane, 1000

25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets

PES Syringe Filter, iPure™ brand, 0.22µm, 25mm housing

25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.

Acrodisc® 25 mm Syringe Filter with 0.2 µm PVDF Membrane

Acrodisc® Syringe Filters with PVDF Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4406 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 829.22 / CV. Add to Quote. For any queries, please click on the below Submit a Question option. In stock 75 available Check Availablity.

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Polyethersulfone (PES) | Sorbent Technologies, Inc.

Dec 7, 2020 · CHROMAFIL® Syringe Filters - Polyethersulfone (PES) Hydrophilic membrane For aqueous and slightly organic liquids with higher flow rates Very low adsorption for pharmaceuticals and proteins Good stability against acids and bases Sterile PES (each filter individually sealed) Binding capacity for proteins for both types 29 µg/filter .tg {border-collapse:collapse;border-spacing:0;margin:0px

Acrodisc® Syringe Filters, 25 mm, Pall Laboratory | VWR

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

Syringe Filters - Pall Corporation

For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2.

25 mm, 0.45 µm, Acrodisc® Syringe Filter, 1000/pkg | Pall Shop

Buy online Acrodisc® 25 mm syringe filters, pore size 0.45 µm, from Pall laboratory products - used in HPLC/UHPLC sample preparation applications. These filters come with a maximum operating pressure of 5.2 bar at 55 °C.

Corning Filtration Guide

Syringe/Disc Filters The smaller conventional Corning® syringe disc-type filters (4, 15, 25, 26, and 28 mm diameter) are used with syringes which serves as both the fluid reservoir and the pressure source. They are 100% integrity tested. The HPLC-certified non-sterile syringe filters are available with nylon, regenerated

HPLC prep—which filter fits your chromatography sample best?

Jul 11, 2017 · HPLC prep using a stacked syringe filter. Syringe filtration often involves aspirating the sample, fitting a particle filter, and filtering into an autosampler vial. The vial is finally capped and transferred to an autosampler. This filtration process can be repeated dozens of time a day, depending on your laboratory workflow and HPLC capacity.

Acrodisc® 25 mm Syringe Filter, 0.2 µm PTFE Membrane, 200/cs

Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4225 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 858.92 / CV. Add to Cart. Add to Quote.

Syringe Filters | Thermo Fisher Scientific - US

Titan3 Premium Syringe Filters Target2 Routine Syringe Filters Choice Basic Syringe Filters; Range of filter sizes: 4mm to 30mm: 4mm to 30mm: 13mm to 25mm: High-quality filtration solutions : Low extractable membranes and housing : Plain polypropylene housing : HPLC performance tested : Enhanced Luer Lock inlet which provides secure attachment

High Quality Specialty Syringe Filters | I.W. Tremont

HPLC Certified. High quality and cost effective syringe filters are Sterile PES Syringe Filters, 0.45(μm), 25(mm), GF prefilter, 100 pack: IWT-ES10310:

Choice™ PES (Polyethersulfone) Syringe Filters

Choice PES Syringe Filters Specifications Membrane: HPLC certified Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Choice PES Syringe Filter Applications IC sample preparation and analysis Dissolution testing Chemical Incompatibilities

Acrodisc® 25 mm Syringe Filter with 0.2 µm PVDF Membrane

Acrodisc® Syringe Filters with PVDF Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4406 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 829.22 / CV. Add to Quote. For any queries, please click on the below Submit a Question option. In stock 75 available Check Availablity.

Millex® Syringe Filters - Sigma-Aldrich

10-100 mL: 25 mm, 33 mm Sterile Millex ® Syringe Filters Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore Express ® PLUS polyethersulfone (PES) membrane

Acrodisc® 25 mm Syringe Filter, 0.45 µm PTFE Membrane, 1000

25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets

Non-Sterile Syringe Filters - Pall Corporation

Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL See All Attributes Add to Quote In stock 4 available Check Availablity $ 302.94 / PAC Add to Cart Acrodisc® Syringe Filter - 0.8 µm with Versapor membrane, polypropylene housing (50/pkg 200/cs) Product ID AP-4189

PES Syringe Filter, iPure™ brand, 0.22µm, 25mm housing

25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.

HPLC prep—which filter fits your chromatography sample best?

Jul 11, 2017 · HPLC prep using a stacked syringe filter. Syringe filtration often involves aspirating the sample, fitting a particle filter, and filtering into an autosampler vial. The vial is finally capped and transferred to an autosampler. This filtration process can be repeated dozens of time a day, depending on your laboratory workflow and HPLC capacity.

Syringe Filters - Pall Corporation

For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2.

Acrodisc® Syringe Filters, 25 mm, Pall Laboratory | VWR

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the

Syringe Filters - Sigma-Aldrich

For batch-to-batch consistency, these filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 210 and 254 nm with water, methanol, and acetonitrile. Whatman ® Roby syringe filters are designed specifically for automated filtration systems.

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Whatman Puradisc 25 syringe filters 0.2 um, PES sterile- pack

Whatman® Puradisc 25 syringe filters 0.45 μm, PES sterile, 50/pk View Price and Availability Z741696 Nalgene® syringe filter units, disposable, polyethersulfone (PES) membrane pore size 0.2 μm, diam. 13 mm View Price and Availability CLS431212 Corning® syringe filters regenerated cellulose membrane, diam. 4 mm, pore size 0.2 μm

HPLC prep—which filter fits your chromatography sample best?

Jul 11, 2017 · HPLC prep using a stacked syringe filter. Syringe filtration often involves aspirating the sample, fitting a particle filter, and filtering into an autosampler vial. The vial is finally capped and transferred to an autosampler. This filtration process can be repeated dozens of time a day, depending on your laboratory workflow and HPLC capacity.

Acrodisc® 25 mm Syringe Filter, 0.2 µm PTFE Membrane, 200/cs

Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4225 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 858.92 / CV. Add to Cart. Add to Quote.

Acrodisc® 25 mm Syringe Filter, 0.45 µm PTFE Membrane, 1000

25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets

Choice™ PVDF (Hydrophilic) Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 13 mm, 100 Pk.

High Quality Specialty Syringe Filters | I.W. Tremont

HPLC Certified. High quality and cost effective syringe filters are Sterile PES Syringe Filters, 0.45(μm), 25(mm), GF prefilter, 100 pack: IWT-ES10310:

HPLC Syringe Filter - Hplc Vials

25mm Syringe Filter for Sale 1. Diameter: 25mm 2.Membrane: PTFE, PVDF, PES, MCE, NYLON, PP, CA, etc. 3.Pore Size: 0.22um / 0.45um 4.House Material: PP 5. Sample volume: < 100ml 6. Filter area: 4.3cm2 7. Dead volume: <100ul Get Price Details 13mm Syringe Filters Wholesale 1. Diameter: 13mm 2.Membrane: PTFE, PVDF, PES, MCE, NYLON, PP, CA, etc.

Syringe Filters - Sigma-Aldrich

For batch-to-batch consistency, these filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 210 and 254 nm with water, methanol, and acetonitrile. Whatman ® Roby syringe filters are designed specifically for automated filtration systems.

PES Syringe Filters - Pall Corporation

Acrodisc® Syringe Filter with Supor® Membrane - 0.8/0.2 µm, 25 mm modified acrylic housing (1000/pkg) Product ID 4504 Unit of Measure 1/PAC Min Order Qty 1 Pore Size 0.8/0.2 µm µm nominal Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Polyethersulfone (PES) Hold-Up Volume <300 µL Housing Material Modified acrylic

Non-Sterile Syringe Filters - Pall Corporation

Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL See All Attributes Add to Quote In stock 4 available Check Availablity $ 302.94 / PAC Add to Cart Acrodisc® Syringe Filter - 0.8 µm with Versapor membrane, polypropylene housing (50/pkg 200/cs) Product ID AP-4189

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Captiva Syringe Filters | Chromatography | Aijiren

Captiva syringe filters offer the industry’s highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC) and ion chromatography. Sample Filtration

Syringe Filters - Pall Corporation

For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2.

25 mm, 0.45 µm, Acrodisc® Syringe Filter, 1000/pkg | Pall Shop

Buy online Acrodisc® 25 mm syringe filters, pore size 0.45 µm, from Pall laboratory products - used in HPLC/UHPLC sample preparation applications. These filters come with a maximum operating pressure of 5.2 bar at 55 °C.

PES Syringe Filter, iPure™ brand, 0.22µm, 25mm housing

25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.

Choice™ PES (Polyethersulfone) Syringe Filters

Choice PES Syringe Filters Specifications Membrane: HPLC certified Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Choice PES Syringe Filter Applications IC sample preparation and analysis Dissolution testing Chemical Incompatibilities