HPLC Syringe Filters HPLC Syringe Filters HPLC Syringe Filters
HPLC Syringe Filters HPLC Syringe Filters HPLC Syringe Filters

Iso9001 0.45 um ptfe membrane filter for hplc minisart

Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA) Qty/Pack: 100pcs/pack Application: Filter Payment: T/T MOQ: 1 pack
Inquiry Chat Now
Product Description

Macherey-Nagel Chromafil Xtra PTFE-45/25 729205 | Lab Unlimited

Filters with 0.2µm pores have a yellow upper housing, for filters with 0.45µm pores this is colourless; the different membrane types are distinguished by different colours Low dead volume ~80µl for 25mm, 12µl for 15mm, 5µl for 3mm.

Membrane Filters for Lab Filtration | analytics-shop.com

PTFE membranes are extremely resistant to aggressive solvents and acids and can be used to filter particulate from both liquid and gas samples. Regenerated Cellulose (RC) Regenerated cellulose membranes are resistant to solvents and are hydrophilic. 0.45 μm pore size is typically used for HPLC sample preparation.

PTFE Syringe Filters, 0.45 um Hydrophilic IC Syringe Filters

PTFE 0.45um filter could be widely applied in the pharmaceutical industry for sterile filtration of various water-soluble solvents, including eye drops and antibiotics. Meanwhile, 0.45um syringe filter is also perfect for the sterile filtration of highly corrosive solvents and organic solvents. Features of Hydrophilic PTFE Syringe Filters

Syringe Filters - Fisher Sci

Syringe Filters MilliporeSigma™ Millex™-GP Sterile Syringe Filters with PES Membrane Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions

17574K MINISART SRP15 Syringe Filter 0.45 um., Sartorius

[Weloveshopping.com] Description Minisart® SRP syringe filters with a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis, which require an even more chemical resistant unit than Minisart® RC, e.g. for solvents such as acetone, dimethylformamide and DMSO, or for aggressive

Membrane Filtration | Membrane Filters | Sartorius

PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant. Moreover they can be used to filter aqueous solutions as well, but because of their hydrophobic characteristics, they must be pre-wetted with ethanol or

Syringe filter Minisart® NML, SFAC | Lab Unlimited

Hausing MBS. SFCA / CA (Surfactant-free Cellulose Acetate) membrane. For sterile, particle free, ultrapure filtration of small volumes of liquid up to approx. 100 ml. Color coded and printed for easy membrane and pore size identification.

Syringe Filter, Membrane Filter FQA - filtration solutions

A. A membrane filter is a matrix with channels which act as a screen and retain particles larger than the filter on the surface of the membrane. Membrane filters allow the retention of submicron particles and organisms. Note that pores have not been observed in RO or NF membranes using a microscope.

Sartorius™ Minisart™ SRP Syringe Filters 0.45μm; 4mm; Non

Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius™ Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 µm pores.

17574----------K - Syringe filter Minisart SRP15, PTFE, 15 mm

Syringe filter Minisart SRP15, PTFE, 15 mm, 0.45µm, non-sterile, 50 pc/PAK, hydrophobic PTFE Regular Price: €127.00 Special Price €123.19

PB Filters | Micronz

16596 HYK 26 mm 5.3 cm2 Minisart HY, sterile pack of 50, 0.2um PTFE membrane, MBS housing Minisart Syringe Filters Minisart syringe filters are ready-to-use filter units, offering high flow rates at low inlet pressures, to make rapid filtration of possible.

Minisart filters pore size 0.45 μm | Sigma-Aldrich

Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.

0.45um Syringe Filters And Membrane Filters For Hplc - Buy 0

0.45um Syringe Filters And Membrane Filters For Hplc , Find Complete Details about 0.45um Syringe Filters And Membrane Filters For Hplc,0.45um Syringe Filter,Syringe Filter,Syringe Filters For Hplc from Other Lab Supplies Supplier or Manufacturer-Shanghai Zdan International Co., Ltd.

Filtration | Thermo Fisher Scientific - AU

Filtration is an integral piece of nearly every workflow of every lab. Whether its cell culture, protein research, water testing, bioprocess design, or QA/QC testing of beverages – filtration will play a role in your lab’s daily routine and Thermo Fisher Scientific has the tools you need.

Ptfe Membrane 0.2 at Thomas Scientific

PTFE filter membrane is resistant to most solvents Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes 0.05 µm pore size capsules Related Products: Solvent Filtration Compare this item

Inquiry
Send on email.all fields width on * are required. Please enter your question and contact information.we will get back to you as soon as possible!