Iso9001 0.45 um ptfe syringe filter for hplc millex
Syringe Filters for HPLC & Sample Preparation | analytics
Pore Sizes and Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.
.45 Syringe Filter at Thomas Scientific
Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
0.45 um ptfe syringe filter | Sigma-Aldrich
This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.
Ptfe Hplc Syringe Filter at Thomas Scientific
Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Low-extractable Millex Samplicity filters application note
analysis using HPLC-fluorescence. Both Millex Samplicity® 0.45 µm and 0.20 µm PTFE filters exhibited very low levels of extractables when using fluorescence detection following HPLC analysis (Figures 4 and 5). Water Acetonitrile Methanol LC-MS-certified syringe filter 2x106 2 x105 2.5 x107 Millex Samplicity® 0.45 µm PTFE 3 x106 3 x105 1 x106
Quick Reference Guide Millex Syringe Filters
0.45 HN 10 mL <25 µL Male Luer slip 100 SLHNX13NL Male Luer slip 1000 SLHNX13NK Tube outlet 100 SLHNX13TL IC Millex Filters (Hydrophilic PTFE) Membrane 0.20 IC Millex-LG 10 mL <10 µL Male Luer slip 100 SLLGC13NL 0.45 IC Millex-LH 10 mL <10 µL Male Luer slip 100 SLLHC13NL Fluoropore (Hydrophobic PTFE) Membrane
Nonsterile Millex® Syringe Filters | Sigma-Aldrich
Prepare samples using low-extractable Millex ® syringe filters to ensure clean baselines and maximize instrument uptime for sensitive analyses, such as dissolution testing, LC-MS, UHPLC, and ion chromatography.
Millex Samplicity Filters | Life Science Research | Merck
Quality membrane options, including PVDF (0.45 um), hydrophilic PTFE (0.45 um) and hydrophilic PTFE (0.2 um) The Samplicity® Filtration System Reduces Waste. Using the Samplicity® system results in a 33% reduction in waste weight and a 66% reduction in waste volume, and eliminates segregation of syringe waste.
Syringe filters | VWR
Available with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size, with the choice often made on analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm, and if 3 μm or smaller then use 0,2 μm.
Syringe Filters | Fisher Scientific
Syringe Filters Merck Millipore Millex™-GP Sterile Syringe Filters with PES Membrane Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions
PTFE Syringe Filters, 0.45 um Hydrophilic IC Syringe Filters
Hydrophilic PTFE 0.22/0.45 um IC Syringe Filters Hawach hydrophilic PTFE syringe filters stand up to the most aggressive solvent, acid, and base samples. Female Luer lock inlet, male slip outlet (50mm is hose barb).
Syringe Filter Online at Syringe Filter in India
These independent ready-to-use Syringe Filters with pes/Nylon /PTFE/PVDF membrane filters have excellent flow speed and high filtrable volume. 1um, 0.45 um, 0.22 ...
Syringe Filters - Pall Corporation
Syringe filters must also have low protein binding to ensure proteins are not retained in the filter. Sample Clean-Up, Virus Filtration, and Mycoplasma Reduction Laboratories need a wide range of membrane types and pore sizes for all varieties of sample clean-up, cell debris removal, virus filtration, or general filtration purposes.
SLCR025NB - Syringe Filter, Millex LCR, PTFE, 25 mm, 0,45 µm
DIN ISO 9001:2015 certified Syringe Filter, Millex LCR, PTFE, 25 mm, 0,45 µm, 250/pk ... , makes the originally hydrophobic - Membrane more hydrophilic ...
Solvent Compatibility Chart for Syringe Filters
Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure.