Iso9001 0.45 um ptfe syringe filter for hplc minisart
Minisart® NML | HY | SRP | Manualzz
Membrane material: CA (cellulose acetate), pore size: 0.45 μm – Minisart® NML: 16555-----Q, 17598-----Q Medical-grade injection filter and vent filter for removal of particles from liquids as well as reduction of microbes and | or removal of particles from dry air and gases for eventual infusion, administration or introduction into the
Minisart Syringe Filters The Easy Choice – Clean and Safe
Minisart® Syringe Filters Elimination of particles from your samples prior to HPLC or ... 4 mm PTFE PP 0.45 μm Male Luer Slip Yellow Tray No 500 1 -----Q
MINISART SRP25, Syringe Filter 0.45 um. 50/Pkg ยี่ห้อ Sartorius
Minisart® SRP25 Syringe Filter 17576-----K, 0.45 µm hydrophobic PTFE. Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17576 with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet. Version K is a non-sterile pack of 50.
2SRF2-17846ACK NYLON SYRINGE FILTER 0.45 UM, 25 MM., 50/PKG
Minisart SRP (Hydrophobic PTFE) 2SRF2-17846ACK NYLON SYRINGE FILTER 0.45 UM, 25 MM., 50/PKG ที่คุณเลือกเข้าไปอยู่ใน ...
Minisart® RC25 Syringe Filter 17765----------K, 0.45 µm
Minisart® RC25 Syringe Filter 17765----------K, 0.45 µm Regenerated Cellulose. Minisart ® RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17765 with a pore size of 0.45 µm can be used for sample preparation and has a male luer slip outlet.
Laboratory & Bioprocess Products and Services | Sartorius
From consumables and laboratory water purification systems to industry-leading weighing technology, our sophisticated solutions also include liquid handling, fermentation, filtration, and fluid management. Find out how to accelerate clinical pipelines, increase drug manufacturing efficiency, and reduce costs with our bioprocess solutions.
How to Choose Right Syringe Filter -- Filter Membrane Materials
Jan 08, 2017 · PTFE membranes are chemically resistant to nearly all solvents, acids and bases. The membrane has low extractable and good thermal stability. PTFE is hydrophobic and requires pre-wetting prior to use with aqueous solvents. Sterilization: Syringe filters can be sterilized by autoclave at 125° for 15 minutes.
Welded Syringe Filter - Autosampler Vial, Hplc Vial, PTFE
Minisart Syringe Filter. Nylon Syringe Filters are a good option for most general laboratory filtration applications and filtration of most HPLC samples.
Syringe Filters | Life Science Research | Merck
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
Whatman® GD/X syringe filters cellulose acetate membrane
Whatman® GD/X syringe filters cellulose acetate membrane, pore size 0.45 μm, diam. 25 mm, sterile, pk of 50 ea; Synonyms: Z286907,syringe filter,syringe filters,Whatman filter; find -WHA69012504 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Sartorius Syringe Filters Minisart-plus 0.4um 16533-K | Lab
The Minisart® High Flow is a syringe filter for rapid volume sterilisation with maximum user convenience. Ready-to-use units, which offer flow rates at low inlet pressures, allow for a correspondingly rapid sterile filtration. Product Specification: Filter diam.: 28mm. Pore size: 0.45 µm.
Minisart Syringe Filters for HPLC Sample Preparation
Minisart® Syringe Filters for HPLC Sample Preparation or Hydrophobic PTFE Sartorius Minisart ® filters reliably remove ... 25 mm 0.45 µm No 50 17765-----K
Sartorius Minisart™ SRP Syringe Filters - Fisher Sci
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning.
0.45 um Syringe Filters - Grainger Industrial Supply
0.45 um Syringe Filters. 44 products. Syringe filters from Grainger are molded in the prolypropylene housings to help provide a reliable seal without adhesives. Glass fiber filters can handle viscose solutions and turbid liquids. PES filters can easily prefilter and filter buffers and culture media. PTFE filters can handle degassing and
Minisart filters pore size 0.2 μm | Sigma-Aldrich
Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.