Minisart syringe filter 0.2 micron hplc filters for analysis
Minisart filters pore size 1.2 μm | Sigma-Aldrich
Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.
Syringe Filter | CA Syringe Filters | Pvdf Syringe Filters
• AXIVA Syringe filters with prefilter (glass fibre filter) enhance the throughput rate by retention of particle > 2.0 micron size at prefiltration stage. • AXIVA Syringe filters with prefilter (glass fibre filter) are suitable for highly turbid or milky solutions • They are widely
Syringe Filters | Life Science Research | MilliporeSigma
Syringe filters: How Quality Could Make or Break Your HPLC This short animation explains how your syringe filter might be putting your HPLC at risk. Some syringe filters exhibit unpredictable loss of membrane integrity, allowing particles to pass through the filter.
Syringe Filters | Fisher Scientific
Cell Culture & Analysis Cell Culture Dishes, Plates and Flasks Cell Culture Media Cryogenic Storage Foetal Calf and Other Sera View All Cell Culture Bioprocess Systems And Accessories Cell Based Assays Flow Cytometry Microscopes and Cellular Imaging
Syringe and Syringeless Filters - Fisher Sci
0 No offer available Chemical Structure Product Certificates Safety Data Sheets Order Status New Offers Order By Product Code Shop Products Antibodies & Protein Biology
Sartorius Minisart RC Syringe Filters, Sterile 0.2µm;
Description Minisart RC Units with hydrophilic, solvent-resistant RC-membranes. Ready-to-use syringe filter units for simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis. Minisart RC units outperform competitive hydrophilic
Syringe Filters - Fisher Sci
Sartorius™ Minisart™ SRP4 Syringe Filters. Minisart™ SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17844 with a pore size of 0.2 μm can be used for sample preparation and sterile filtration. It has a male luer slip outlet.
Syringe Filters for Sterile Filtration | Minisart® | Sartorius
Sartorius Minisart® syringe filters are the No. 1 choice for sterile filtration, analytical sample preparation, and clarification of media additives, buffers, chemical reagents, drugs and even gases! Innovative design features, coupled with the largest surface areas and
Sartorius Minisart SRP Syringe Filters :Filtration:Syringe
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius™ Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0
Sartorius Minisart SRP Syringe Filters 0.2µm; 25mm;
Sartorius Minisart SRP Syringe Filters Ready-to-use units for simple, rapid and reliable ultracleaning of small volume samples for the HPLC or GC analysis Manufacturer: Sartorius™ S7575FXOSK
Minisart® SRP15 Syringe Filter 17573----------K, 0.2 µm
Minisart® SRP15 Syringe Filter 17573----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It
Sartorius™ Minisart™ RC Syringe Filters: Syringe and
Sartorius Minisart RC Syringe Filters utilize a regenerated cellulose membrane for clarification of small volume samples. Choose from 0.2 and 0.45μm pore sizes in 15, 25 and 4mm diameter filters. £66.00 - £1256 Specifications Yes Housing Material 4.5bar
Minisart® RC25 Syringe Filter 17764----------K, 0.2 µm
Minisart® RC25 Syringe Filter 17764----------K, 0.2 µm Regenerated Cellulose. Minisart ® RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17764 with a pore size of 0.2 µm can be used for sample preparation and has a male luer slip outlet.
Syringe Filter 0.2 at Thomas Scientific
These 0.2µm syringe filters are designed for particle removal and preparation of organic solvents and similar solutions prior to chromatography analysis or other instrument analysis. Syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration
Sartorius Minisart SRP Syringe Filters 0.2µm; 15mm; …
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius™ Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0…