pes syringe filter 0.2 micron type from Minisart

Validation Guide Minisart® Syringe Filters

The Minisart® NML and Minisart® high flowsyringe filters remove microorganisms, particles, precipitates, undissolved powders larger than 0.2 µm from aqueous solutions or water. The single–use products consists a hydrophilic surfactant free Cellulose Acetate (SFCA) or Polyethersulfone (PES) membrane filter sealed in a MBS housing.

Minisart® SRP15 Syringe Filter 17573----------K, 0.2 µm

Minisart® SRP15 Syringe Filter 17573----------K, 0.2 µm hydrophobic PTFE Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet.

PES Syringe Filter – Membrane Solutions

Introduction. MS ® PES syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs.

Syringe Filters - Fisher Sci

Syringe Filters Sartorius™ Minisart™ NML Syringe Filters, Sterile Provides fast and reliable filtration of small to medium volumes, complete with ready-to-connect filter units.

PES syringe filter | Sigma-Aldrich

This 33 mm syringe filter with a Hydrophilic Nylon membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.2 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses. Millipore

25 mm Acrodisc® Syringe Filters with 0.2 µm Supor® Membrane

Syringe Filters with High Flow Rates and Low Protein Binding 0.2 µm, 25 mm (50/pkg). Superior flow rates and higher throughputs than competitive devices., Pall Acrodisc Syringe Filters with Supor Membrane, Sterile Filtration, 25 mm (50/pkg) “Pall Laboratory products are designed for laboratory applications only.

Polyethersulfone (PES) Membrane Filters, 0.2 Micron, 142mm, 20/Pk

Sterlitech PES (polyethersulfone) membrane filters, 0.2 micron pore size, 142 mm diameter, pack of 20. Hydrophilic, low protein/drug binding, minimal extractables, and broad chemical tolerance; ideal for pharmaceutical, medical, and life science applications.

Minisart® Syringe Filters | Sterile Filtration | Sartorius

Minisart® Syringe Filters: The Easy Choice – Clean and Safe For sterilization of liquids, sterile filtration with Minisart® syringe filters is the optimal solution. They remove all microorganisms and particles reliably, without any influence of their ingredients, due to adsorption or decomposition.

Sartorius Minisart High Flow Syringe Filters: Sterile 0.2µm

Features PES membrane filter for excellent flow speed and high filtrable volume. Sartorius™ Minisart™ High Flow Syringe Filters: Sterile provide sterile filtration, particle removal and ultracleaning. Independent, ready-to-use syringe filters offer flow rates at low inlet pressures allowing for a correspondingly rapid sterile filtration.

Syringe and Syringeless Filters - Fisher Sci

Fisher Scientific - Guldensporenpark 26 - 9820 Merelbeke - Belgium Tel. 056 260 260 - Fax. 056 260 270 - be.fisher@thermofisher.com S.R.L. au capital de EUR 18 550, RCS Bruxelles 667572, N° TVA : BE 47 92 91 549

Sartorius Minisart PES Syringe Filters Minisart PES Syringe

Minisart™ PES with polyethersulfone (PES) is optimal for highest flow rates and a pH of 2 - 13. Type 1776D with a pore size of 0.22 µm can be used for sterile filtration and has a male luer slip outlet. Version ACK is individually packed and sterilized by ethylene oxide (EO). Manufacturer: Sartorius™ 1776DACK

Syringe filters, Minisart® High-Flow, Polyethersulfon (PES

Minisart ® High Flow syringe filters for sterile filtration, particle removal and ultra-cleaning. Covers a wide pH range. These independent ready-to-use syringe filters with PES membrane filter feature excellent flow speed and high filterable volume.

Syringe Filters for Sterile Filtration | Minisart® | Sartorius

For optimal results Minisart® filters made of acrylic-based MBS housing provide a choice of membranes with pore sizes ranging from 0.1 µm to 5 µm for high flow rates and lowest adsorption characteristics. The effective filtration area of 6.2 cm2 for fastest filtration is the biggest amongst premium syringe filters.

How to Choose Right Syringe Filter -- Filter Membrane Materials

Choose right syringe filter - Syringe Filter Membrane Materials: MCE, NYLON, PES, PVDF, PTFE, RC, etc. Protein binding property, etc. All Filters 50% Off

hplc filter nylon filters supplier minisart

Syringe Filters for HPLC and sample preparation . Pore Sizes and Pore Volumes. The filter size depends highly on the filtration volume. For small volumes ( 1 ml), syringe filters with a diameter of 3 mm are usually for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes ( 3 µm) are 0.2 and for columns