Premium 0.2 um ptfe membrane filter for hplc thermo fisher

Syringe Filters for HPLC & Sample Preparation | analytics

Pore Sizes and Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.

Syringe Filter 0.2 at Thomas Scientific

The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are

Thermo Scientific Nalgene Syringe Filters PTFE - Fisher Sci

Description. Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.

Nalgene® vacuum filtration system filter capacity 500 mL

Nalgene® vacuum filtration system filter capacity 500 mL, pore size 0.2 μm; find null-Z358193 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.

Thermo ScientificNalgene Vent Filters and 50mm Capsules Pore

Nalgene™ 50mm inline filter with PTFE membrane provides an excellent barrier for sterile venting of benchtop fermentors, in-line gas filtration, or protecting vacuum pumps from moisture. It also gives the ability to filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC.

smart H2O for you, and your science

All systems include an ultrapure polisher cartridge, UV lamp, RO membrane, RO pretreatment filters (5 µm filter and hardness stabilizer), EDI module, sterile 0.2 µm filter, 10” 1 µm filter (tank outlet) and pressure regulator.

Nalgene™ Vent Filters and 50mm Capsules

Nalgene™ 50mm inline filter with PTFE membrane provides an excellent barrier for sterile venting of benchtop fermentors, in-line gas filtration, or protecting vacuum pumps from moisture. It also gives the ability to filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC.

FAQs - FILTRATION - Thermo Fisher Scientific

What membrane filter pore size should I use for sterilization? Regardless of the membrane filter material, always use a 0.2 µm pore size membrane filter as the final filter for any sterilizing filtration. The 0.2 µm membranes used in Thermo Scientific™ Nalgene™ filters have been tested and shown to retain 100% of a challenge of 1 X 107 cfu/cm2

Nalgene Syringe Filters - Thermo Fisher Scientific

50mm diameter for gases or 0.2 – 5 L fluid volume, Stepped hose barb inlet and outlet 0.2 PTFE Polypropylene DS0222-0020* 10 0.45 PTFE Polypropylene DS0222-0045* 10

Eppendorf® Membrane Filter pore size 0.45 μm, sterile, PTFE

Eppendorf® Membrane Filter pore size 0.45 μm, sterile, PTFE, pkg of 5 pieces, (Easypet 4421); find null-EP4421601009 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.

0.22 Filter at Thomas Scientific

0.22 Filter found in: 0.22mm Filter 20 F/Super Q, 0.22 Micron Filter, Purple Nylon Syringe Filters, 0.22 µm, Yellow Nylon Syringe Filters, 0.22 µm, Micro..

Thermo Scientific Choice Syringe Filters

Membrane Type Pore Size (µm) Outside Diameter (mm) Part Number Pack Size NYLON 0.2 13 CH2213-NN 100 0.2 25 CH2225-NN 100 0.45 13 CH4513-NN 100 0.45 25 CH4525-NN 100

Syringe Filters | Thermo Fisher Scientific - US

Thermo Scientific Titan3, Target2, and Choice SyringeFilters remove interfering materials, fine particles, and microorganisms, providing you with cleaner sample extracts. These high-quality robust sample filtration solutions are available in a variety of syringe filter sizes, membranes, and housings for a wide range of samples and applications.

Syringe Filters - Fisher Sci

Syringe Filters MilliporeSigma™ Millex™-GP Sterile Syringe Filters with PES Membrane Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions

HPLC Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

HPLC Syringe Filters available in two sizes: 13 mm and 30 mm; Two pore sizes: 0.2 µm and 0.45 µm; Glass Fiber syringe filters available in 1.2 and 0.7 µm; Available in 7 color-coded membranes; How to Order the Correct Syringe Filter for your Sample Prep Application. All syringe filter part numbers use the following nomenclature: F XX-YY ZZZ