Premium 0.45 um ptfe syringe filter for hplc millex
Syringe Filter Units at Thomas Scientific
Millex-HP Syringe Filter Unit, 0.45 µm, polyethersulfone, 33 mm, gamma. A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 250. Low Protein Binding Sterilization of tissue culture media, protein solutions or aqueous solutions.
Syringe Filters - Pall Corporation
For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives. Larger 0.45, 0.8, 1.2 and 5 µm membrane pore sizes can be used for prefiltration and/or clarification.
Millex Syringe Filter, Durapore® ( PVDF ), Non-sterile 0.45
Millex Syringe Filter, Durapore® ( PVDF ), Non-sterile 0.45 µm pore size, 33 mm diameter, Millex-HV Durapore® ( PVDF ) membrane, hydrophilic; find Millipore-SLHV033N MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Syringe Filter PTFE for HPLC - hplcvials.com
syringe filters combine premium quality and economy. PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other
Syringe Filters - Fisher Sci
Designed for sterilizing and clarifying sterile solutions. Millex™ Sterile Syringe Filters: MCE Membrane are ready-to-use, syringe-driven units that have never been touched by human hands during filter assembly. Feature 0.22, 0.45 and 0.80µm pore sizes; medical-grade filters available. Pricing and Availability.
Syringe Filters - Fisher Scientific
Syringe Filters Merck Millex™-GP Sterile Syringe Filter, PES, 0.22 μm (Research Use Only) Ready-to-use syringe-driven units, designed for sterilizing and clarifying sterile solutions
Quick Reference Guide Millex Syringe Filters
0.45 HN 10 mL <25 µL Male Luer slip 100 SLHNX13NL Male Luer slip 1000 SLHNX13NK Tube outlet 100 SLHNX13TL IC Millex Filters (Hydrophilic PTFE) Membrane 0.20 IC Millex-LG 10 mL <10 µL Male Luer slip 100 SLLGC13NL 0.45 IC Millex-LH 10 mL <10 µL Male Luer slip 100 SLLHC13NL Fluoropore (Hydrophobic PTFE) Membrane
Syringe Filter 0.2 at Thomas Scientific
Syringe Filter 0.2 found in: 4mm Syringe Filter Ca 0.2um 100 / Pk, Syringe filter PES 25mm 0.2um 1000/pk, Syringe filter PVDF 25mm 0.2um 1000/pk, Syringe..
Millex® Syringe Filters | Life Science Research | MilliporeSigma
Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters. Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS ITEM WILL BE REPLACED BY SLCR033NB Replaced by SLCR033NB, 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.
Celltreat PTFE Syringe Filters 0.45 um 30 mm ⋆ Morganville
Celltreat PTFE syringe filter, 0.45 um pore size, 30 mm diameter. Celltreat Scientific brand polytetrafluoroethylene (PTFE) syringe filters. Available individually packed sterile, 30/pack, or bulk packed non-sterile, 100/pack. Low hold up volume, allowing for high sample recovery. Heat-sealed, not glued, polypropylene housing.
Syringe Filters | Life Science Research | Merck
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
Syringe Filters, PTFE - premiumvials.com
PTFE Syringe Filters, 0.45 um, 25mm, Double Luer Lock, PP Housing, sterile, 1000 per pack TSH-SPEC18138 $2,344.60 Ideal for laboratory small volume samples clarification and particles removal.Features and Benefits Easy to use Wide range of filter media Applicable to samples below 80mL Disposable design Quality Filters produced in a controlled
Ptfe Hplc Syringe Filter at Thomas Scientific
Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are. Related Products: 0.45 Ptfe Filter.
Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33
SAMP2LCRB Millipore Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33 mm, non-sterile This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.