Premium hydrophobic ptfe filters for hplc waters
Professional hydrophobic nylon syringe filter for hplc waters
The filter is best made with its Hydrophobic PTFE merane and ideally used before analytical such as HPLC, IC, and GC. Browse through and know more about our Hydrophobic PTFE Syringe filters below. For clarifiion and inquiries about our products, please email us at [email protected] or call 1-603-890-3699.
Whatman 10463513 PTFE ReZist Syringe Filter for HPLC, 30mm, 0
The Whatman ReZist syringe filter has been specifically designed to be resistant to organic solvents. The filter contains a hydrophobic PTFE membrane laminated with polypropylene. The filter provides first class chemical resistance against usual organic HPLC solvents. Inlet/Outlet: Luer-Lock Female/Luer Male. PTFE. 30mm. 0.45µm. 100/Pack.
PTFE Syringe Filters - Non-Sterile Syringe Filters
PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-Sterile Syringe Filters
Hydrophobic Ptfe at Thomas Scientific
Hydrophobic PTFE syringe filters have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Hydrophobic Filter at Thomas Scientific
Hydrophobic PTFE syringe filters have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are color-coded and available in smooth Related Products: 20 Ml Syringe
Orange PTFE (Hydrophobic) Syringe Filters, 0.22 µm, 30 mm
Our superior premium 17 and 30 mm filters are suitable for coarse/crude samples or higher detection limit applications (such as food, beverage, or environmental analysis). These options provide improved filtration speeds and efficiencies due to an advanced pre-filter system and their larger diameters. All our syringe filters are HPLC certified.
HPLC Mobile Phase Filtration Kit | Pall Shop
HPLC certification assures that the filters will not add artifacts to your analysis; GH Polypro membrane is the best choice for filtering mobile phases; PTFE membrane provides the ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases “Pall Laboratory products are designed for laboratory applications only.
Syringe Filters for HPLC and sample preparation | analytics
Permanently hydrophobic filter material, perfectly applicable for air and gas as well as non-polar liquids. PTFE membranes are characterised by an extraordinary chemical resistance versus nearly all chemicals and are suited for both filtration of acids or aggressive solvents and particle filtration of air or water samples up to 200° C.
Premium hydrophilic nylon membrane filter for hplc vwr
nylon membrane filter for sale Syringe Filters Thomas Sci. These syringe filters offer a choice of filter mediahydrophilic nylon merane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) merane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) merane for use in aqueous and non-aggressive, solvent
HPLC Syringe Filter, Nylon/Hydrophilic PVDF Syringe Filter
1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper, Decrimper
Whatman 10463535 PTFE ReZist Syringe Filter for HPLC, 30mm, 5
The Whatman ReZist syringe filter has been specifically designed to be resistant to organic solvents. The filter contains a hydrophobic PTFE membrane laminated with polypropylene. The filter provides first class chemical resistance against usual organic HPLC solvents. Inlet/Outlet: Luer-Lock Female/Luer Male. PTFE. 30mm. 5.0µm. 500/Pack.
Syringe Filters for HPLC & Sample Preparation | analytics
Pore Sizes and Volumes. The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are used for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm, respectively.
Laboratory Filters : Waters
Membrane Type (PTFE, GHP, PVDF, Nylon) — Typically, the first step in selecting a suitable filter is to choose a membrane that is chemically compatible with the sample (see chart opposite). For aqueous samples, it is preferable to use a hydrophilic membrane (GHP, PVDF or Nylon) versus a hydrophobic membrane (PTFE).
PTFE Syringe Filters, 0.45 um Hydrophilic IC Syringe Filters
Hawach hydrophilic PTFE syringe filters stand up to the most aggressive solvent, acid, and base samples. Female Luer lock inlet, male slip outlet (50mm is hose barb). PTFE syringe filter product numbers ending with "B" are hydrophobic; all other PTFE syringe filters are hydrophilic.
Membrane filter, PTFE Hydrophobic - ProSciTech
Laminated PTFE filters can also be used to filter aqueous solutions when prewetted with methanol.- compatible with strong acids and aggressive solutions- naturally hydrophobic- improved durability and handling- filtration of strong acids and aggressive solutions- venting applicationsThese filters are compatible with our vacuum filter flasks and