Professional luer lock filter ptfe filters 0.2 um company

EZFlow® Vent Filter, 0.2μm Hydrophobic PTFE, 25mm, Non

These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene housing with a female Double Luer-lock inlet and a male Luer slip outlet.

PTFE Filters|Filters | Environmental Express

This is a 47mm 0.45um PTFE filter only. If you are looking for a syringe filter that is part # SF045T which is a 25mm, 0.45um PTFE syringe filter. This does have a luer-lock fitting that will fit both a luer-lock and slip-luer syringe.

Sterifix® Paed - B. Braun

Venting function - two 0.02 μm hydrophobic PTFE-membranes to. reduce the risk of air embolism regardless position of filter. The hydrophobic characteristic of the membrane blocks the passage of air and successfully vents the excess air out of the system. 3; Technical data. Connections at both sides of the filter with luer lock fittings; No tubing

DIGIPRINT SUPPLIES (an S-One company). PTFE Acrodisc Filter 0

This 0.2 micron PTFE disk air filter is suitable for Océ Arizona / Agfa Anapurna printers. This is Océ original part (number 3010101808). This filter has a diameter of 25mm. Inlet : Female luer lock / Outlet : Male luer.

0.22 Micrometer Filter - Autosampler Vial, Hplc Vial, PTFE

0.22 micrometer filters are largely used in Analysis field for sample preparation, we provide 13mm, 25mm and 30mm diameter at your choice and multiple type of membranes(NY, PES, PTFE,PVDF,etc) available.

PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB,

PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB, 10/Pk Easy-to-use, sterile ,and disposable, these In-Line Filters contain a hydrophobic PTFE membrane ideal for confining and isolating infectious and hazardous material in vacuum systems and venting applications.

Home | Products | ProFill™ HPLC Syringe Filters

17mm HPLC Syringe Filters for small sample volumes; Sample Retention < 0.29ml; Pressure Rating: 790 kPa (= 7.9 bar / = 115 psi) Filter Area: 1.33 cm²; With Luer Lock-Inlet (female) and Luer Slip (male)

Syringe Filter(PTFE) - Quzhou Lab Technology Co.,Ltd

Syringe Filter(PTFE) A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so. The use of a needle is optional; where desired it may be fitted to the end of the syringe

PTFE Syringe Filters, 0.45 µm, 20mm | M4436 | BioVision, Inc.

These filters are designed with a Female Luer-Lok inlet and and Male Luer Slip outlets. Some PTFE Syringe filters can be sterilized and individually wrapped, and certified as RNase-free, Dnase-free, DNA-free with Non-phylogenic.

Luer Lock Glass Fiber 0.45 Micron Syringe Filters

Luer Lock Glass Fiber 0.45 Micron Syringe Filters Hawach Filtstar glass fiber syringe filters act as a valuable pre-filter to extend membrane life with strong dirt absorption capacity. 0.45 micron syringe filters is a hot sale product and are always used in coarse filtration and pre-filtration, preferentially retaining large particles.

UltraCruz® Syringe Filters | SCBT - Santa Cruz Biotechnology

Jan 24, 2017 · Syringe filters feature a 0.10, 0.22 or 0.45 µm pore size, a polyvinylidene fluoride membrane and a polypropylene housing. Filters easily attach to syringes via a luer-lock connection. Filters are sterilized by gamma irradiation and individually packed. Filters are non-pyrogenic, RNA-free and DNA-free. Product Dimensions (dia.): 13 mm, 25 mm

Phenex Syringe Filters - Phenomenex

Phenex syringe filters are designed for efficient and rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high throughput. Proper membrane and size selection are the keys to choosing the best product to maintain the integrity of your sample components as well as to protect your system from

Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm | SLFGL25BS

Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, with Luer outlet, ethylene oxide sterilized. Comes in a pack of 50. - Find MSDS or SDS, a COA, data sheets and more information.

Thermo Scientific™ Titan3™ PTFE (Hydrophobic) Syringe Filters

Syringe filters can be sterilized by autoclave at 125˚C for 15 minutes; Enhanced Luer lock inlet prevents leakage; outlet fitting is a standard size male Luer-slip fitting for ease of filtrate collection

DIGIPRINT SUPPLIES (an S-One company). PTFE Syringe Filter, 0

This 0.2 micron syringe filter is used for degassing purposes with a syringe on various UV printers such as the Océ Arizona. This is Whatman original filter. Specifications - Diameter: 30mm - Pore size: 0.2µm - Membrane: PTFE - Inlet connection : Female luer lock - Outlet connection: Male luer