sterile 0.45 um ptfe membrane filter waters

Nalgene Syringe Filters - Thermo Fisher Scientific

0.2 PTFE Polypropylene 721-1320* 100 0.45 PTFE Polypropylene 721-1345* 100 25mm diameter for 10-100 ml volume, Leur-Lok inlet, male slip outlet 0.2 PTFE Polypropylene 728-2020* 500 0.45 PTFE Polypropylene 728-2045* 500 * autoclavable

Syringe Filters - Pall Corporation

For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives. Larger 0.45, 0.8, 1.2 and 5 µm membrane pore sizes can be used for prefiltration and/or clarification.

Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33

Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33 mm, non-sterile This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.

FAQs - FILTRATION

bacteria and particles, or 0.45 µm pore size for standard microbial QC work. All Nalgene analytical filter CN membranes are certified for water quality work, meeting standards of APHA, EPA, and U.S. Safe Drinking Water Act, and all Nalgene analytical filter funnels and filter units pass ISO7704 testing.

RC white ,sterile, 0.45µ, 47mm, 100Pk | Sartorius

RC white ,sterile, 0.45µ, 47mm, 100Pk. Regenerated cellulose membrane filters are reinforced with nonwoven cellulose. Single packed or dispenser-ready sterile membranes can be used for colony counting, particle testing, microscopy and sterility testing. The membrane filters are made of cellulose nitrate (cellulose mixed ester), cellulose

Nitrocellulose Mixed Ester (MCE) Membrane Filters, Sterile

Our sterile, white, gridded, Mixed Cellulose Esters (MCE) membranes--a versatile mixture of cellulose nitrate and cellulose acetate fibers--are general purpose filters with high recovery rates, high porosity, and superior flow rates. These pre-sterilized filters are suited for single use in many microbiological applications, including the examination of water, wastewater, pharmaceuticals, food

Durapore® Membrane Filter, 0.45 µm | HVLP04700

Description. Durapore® Membrane Filter, 0.45 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits.

ISOLAB USA - Syringe Filters. Pack of 100. PTFE Membrane 25mm

This is a set of 100 pieces of syringe filters which you can use on a laboratory while preparing samples. Their pore size is 0.45 um and they are made from PTFE (polytetrafluoroethylene). They are non-sterile. Housing is strongly and ultrasonically sealed which makes them super strong when applied pressure.

PTFE Vent Filter, Sterile, 0.45 Micron, 50mm, 1/4 in to 3/8

PTFE Vent Filter, Sterile, 0.45 Micron, 50mm, 1/4 in to 3/8 in hose BARB, 10/Pk. Sterile venting of filling vessels, including culture vessels and CO2incubators. Venting of holding tanks for sterile, distilled water and liquid culture media. Autoclave venting. In-line sterilization and particulate removal from air and gases.

Amazon Best Sellers: Best Lab Filter Membranes

MCE Gridded Membrane Filter, Membrane Solutions Mixed Cellulose Esters Membrane Filter, Sterile Individual Pack Membrane Disc Filter, Diameter: 47 mm, Pore Size: 0.45 um, 100/Pk 4.5 out of 5 stars 36

Corning Filtration Guide

biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. Clarification and prefiltration of solutions and solvents is best accomplished with 0.45 µm or larger filter membranes. Prefiltration to improve filter performance can also be accomplished by the use of glass fiber prefilters that can be purchased separately.

0.45 um ptfe syringe filter | Sigma-Aldrich

Product Description. SLHV013SL. A 13 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100. Pricing. SLHV004SL. A 4 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane.

Acrodisc® 13 mm Syringe Filter, 0.45 µm PTFE Membrane, 300/cs

Acrodisc® 13 mm Syringe Filter, 0.45 µm PTFE Membrane, 300/cs | Pall Shop. Free ground shipping on Laboratory products for registered Credit Card users. Acrodisc® Syringe Filters with PTFE Membrane - 0.45 µm, 13mm, male slip luer outlet (100/pkg 300/cs) Share. Product image is a representative example for illustration purposes.

Whatman Puradisc 25 mm PTFE Syringe Filters, 0.45 µm, 1000 Pack

PTFE Syringe Filters, 0.45 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF14469. Regular Price: $103.48. Price $93.59. As low as: $84.23. Description. Description. Whatman 25 mm Puradisc Filters are produced from pigment-free polycarbonate with standard inlet (female luer lock) and outlet (male luer) connections.

Omnipore Membrane Filter | JHWP02500

Omnipore Membrane Filter 0.45 um pore size, Hydrophilic PTFE membrane, 25 mm diameter - Find MSDS or SDS, a COA, data sheets and more information.