syringe filter 0.2 micron type
BD Alaris™ pump module administration sets - BD
Alaris™ Pump Module set back check valve 0.2 micron filter (1.72 sq. in pes low protein binding) roller, pinch clamp(s) 3 SmartSite™ Y-site(s) 6,18,80 from 2-piece male luer lock. 20 drop L: 117 in L: 297 cm PV: 28 mL fluid path sterile.
Whatman 6900-2502 GD/X 25 Sterile Syringe Filter, 25mm, 0.2
Product description Size: 0.2µm Pore Size The Whatman 6900-2502 GD/X 25 sterile syringe filters have a 25mm filter, 0.2 micron retention, and a PVDF membrane. The filter is appropriate for use with highly particular-loaded samples greater than 10mL.
Filters | Sartorius
Lab filters for various applications. Reliable removal of microorganisms and particles from liquids with syringe filters and vacuum filters, ready-to-use and reusable pressure driven filters, membrane and depth filters with different materials or air|gas filters for sterile venting and gas filtration.
Syringe Filters for Sterile Filtration | Minisart® | Sartorius
For optimal results Minisart® filters made of acrylic-based MBS housing provide a choice of membranes with pore sizes ranging from 0.1 µm to 5 µm for high flow rates and lowest adsorption characteristics. The effective filtration area of 6.2 cm2 for fastest filtration is the biggest amongst premium syringe filters.
Understanding syringe filters – Andy Connelly
Sep 28, 2016 · The majority of syringe filters used do not allow you to reclaim the solid. They are often used before analysis to remove any solid, undissolved, material. Other, filter holder (in-line) types allow you to regain your filter (Figure 1). Syringe filters normally use membrane type filters which have a specific particle size cut off (e.g. 0.45 μm).
Syringe Filters - Products
Pall Laboratory’s sterile syringe filters with 0.2 µm membranes remove bacteria, microorganisms, and fungi that can contaminate valuable cultures. Protein Purifi cation Higher cell densities can be diffi cult to filter downstream due to bioburden, which can cause premature filter clogging. This problem can be aided by syringe filters
25 mm Acrodisc® Syringe Filters with 0.2 µm Posidyne
Acrodisc® Syringe Filters Optimized for Scale Up, 25 mm - 0.2 µm, Posidyne membrane, sterile (50/pkg)
Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma
Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma sterilized Background Information Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas.
Defining a Pore Size and Sterile Filtering; 0.2 Micron vs. 0
Before 0.2 and 0.22 micron filters became standard, it was thought that filters with an absolute rating of 0.45 micron were thought to be sufficient to strain out even the smallest bacteria. However, the discovery of Brevundimonas diminuta, showed that there were still bacteria capable of passing through a 0.45 micron filter in large quantities.
Syringe Filter | CA Syringe Filters | Pvdf Syringe Filters
• AXIVA Syringe filters with prefilter (glass fibre filter) enhance the throughput rate by retention of particle > 2.0 micron size at prefiltration stage. • AXIVA Syringe filters with prefilter (glass fibre filter) are suitable for highly turbid or milky solutions • They are widely applicable for filtration of colloidal solutions.
Fisherbrand Syringe Filters: Nylon Membrane
Fisherbrand™ Syringe Filters: Nylon Membrane Low hold-up volume helps you to recover virtually all of your sample after filtering $241.50 - $3020.00
0.22 Micron Syringe Filters - Samples Available - Ships Next
0.22 Micron Syringe Filters Tisch Scientific offers an extensive selection of proven, yet affordable syringe filters that are in stock and ready to ship today. Selected for their durability, material quality and performance characteristics, our syringe filters deliver accurate, measurable results at a fraction of the cost.
Sterile Syringe Filters | Pall Corporation
The filters in Pall Corporation’s UpScale Program incorporate scaleable membranes and materials of construction to assure consistent results, whether you are using syringe filters (less than 100 mL) or larger-capacity capsules and cartridges (up to 5000 L).
Syringe Filters - Lab Filtration - Grainger Industrial Supply
Syringe Filter, 25mm Membrane Dia., 0.45um Pore Size, Nylon Filter Material, 100mL Capacity Item # 12K961 Mfr. Model # 12K961
Sterile Filter 0.2 at Thomas Scientific
Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and Related Products: 0.2 Micron Filter