teflon 0.22 micron syringe filter for analysis from Millex
Millex® Syringe Filters | Sigma-Aldrich
Millex® syringe filters are available as sterile syringe filters or nonsterile syringe filters. Produced with Millipore® membranes, including PES, PVDF, PTFE, and Durapore® membranes, Millex® syringe filters are available as hydrophobic filters and hydrophilic filters in a variety of pore sizes, including common pore sizes 0.2 μm, 0.22 μm, and 0.45 μm.
MilliporeSigma Millex Nonsterile 33mm Syringe Filters
MilliporeSigma Millex Nonsterile 33mm Syringe Filters Remove particulates, reduce signal-to-noise ratios and maintain flat baselines. Millex™ Nonsterile 33mm Syringe Filters are constructed of polyethylene housing with Durapore™ membranes for preparing samples for analysis.
MilliporeSigma Millex Sterile Syringe Filters: Durapore
MilliporeSigma Millex Sterile Syringe Filters: Durapore PVFD Membrane Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0
Syringe Filters for HPLC and sample preparation |
Pore Sizes and Pore Volumes The filter size depends highly on the filtration volume. For small volumes (< 1 ml), syringe filters with a diameter of 3 mm are usually for medium volumes (1-10 ml), 15 mm and for large volumes (> 10 ml) 25 mm. Common pore sizes for UHPLC and HPLC columns with small particle sizes (< 3 µm) are 0.2 and for columns with larger particle sizes (> 3.5 µm) 0.45 µm
Millipore SLLGR04NL PTFE Hydrophilic Millex-LG Non
Millipore SLLGR04NL PTFE Hydrophilic Millex-LG Non-Sterile Syringe Filter Unit, 0.20 Micron, 4mm Diameter, Male Luer Slip, Stepped Outlet (Pack of 100): Science Lab Syringe Filters: Amazon.com: Industrial & Scientific
VWR® Syringe Filters | VWR
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common
Millex-GS Syringe Filter Unit, 0.22 µm, mixed cellulose
Millex-GS Syringe Filter Unit, 0.22 µm, mixed cellulose esters, 33 mm, ethylene oxide sterilized A 33 mm diameter sterile syringe filter with a 0.22 µm pore size Mixed Cellulose Esters membrane. Comes in a pack of 250. - Find MSDS or SDS, a COA, data sheets
Lab Equipment and Lab Supplies | Fisher Scientific -
This 13 mm syringe filter with a hydrophilic PTFE membrane, for non-sterile filtration, has a 0.45 μm pore size used in low protein binding clarification of aqueous & organic solutions. (1) This 25 mm syringe filter with a graduated glass fiber & nylon membrane, for non-sterile filtration, has a 0.45 μm pore size used in clarifying of aqueous & mild organic solutions with high particulate
MilliporeSigma Millex-GP Sterile Syringe Filters with PES
Modified Acrylic Syringe Filter This item has been discontinued by the manufacturer and is no longer available. Please call customer service for assistance: 1-800
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS
Millex Syringe Filter, Hydrophilic PTFE, Non-sterile, THIS ITEM WILL BE REPLACED BY SLCR033NB Replaced by SLCR033NB, 0.45 µm pore size, 25 mm diameter, Millex-LCR hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more
Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm,
Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma sterilized A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50.; find Millipore-SLGV033R MSDS, related peer-reviewed papers, technical
Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm A 25 mm
Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized.; find Millipore-SLFG025LS MSDS, related peer-reviewed papers, technical documents, similar
What are the differences between Nylon and PTFE filters
8/9/2020 · Some filter manufacturers will use surfactants in the PTFE membrane to make them more water compatible. If eluting surfactants are not of concern, this technology may work well. Some solvents or solutions are not recommended for use with Nylon membranes as they may "swell" the membrane and or make them weak in that the membrane may disintegrate or simply burst allowing non filtered
Syringe Filter 0,45um PTFE | Sigma-Aldrich
Millex-FA Syringe Filter Unit, 1.0 µm, hydrophobic PTFE, 50 mm, HB-HB 1 Product Result | Match Criteria: Product Name, Description A 50 mm diameter sterile syringe filter with a 0.22 µm pore size Polyethersulfone membrane. Comes in a pack of 10. ...
Syringe Filters - Fisher Sci
View All Cell Analysis View All Life Sciences Custom DNA Oligos, RNAi & Assays Custom Assays, Antibodies, Oligos Centrifuges & Microcentrifuges Centrifuges & Microcentrifuges Benchtop Centrifuges Centrifugal Filter Devices Centrifuge Accessories