Wholesales 13mm ptfe syringe filter for hplc sigma

Filtration - Syringe Filters - Page 1 - CP Lab Safety

Whatman® 6900-2504 Syringe Filter, GD/X 25mm, Sterile, 0.45um, PVDF, pack/50 Part #: NDC-GBS-6900-2504 Inline Syringe Filter for Levo Pipettes, 3 Microns, PTFE

Millex Syringe Filter, Hydrophilic PTFE, Non-sterile | SLLHC13NL

Millex Syringe Filter, Hydrophilic PTFE, Non-sterile 0.45 µm pore size, 13 mm diameter, Millex-LH hydrophilic PTFE membrane, ion chromatography certified - Find MSDS or SDS, a COA, data sheets and more information.

Trace2 PTFE Membrane Syringe Filter, 13mm, 0.22μm, 100-pk

Trace2 PTFE Membrane, 13mm, 0.22μm (F2300-17)

MilliporeSigmaNon-Sterile Millex Syringe Filter:Filters and

Hydrophilic PTFE membranes have broad chemical compatibility, enabling filtration of aqueous and organic solvents. 33 mm hydrophilic PTFE Millex™ filters have faster flow rates than 25 mm filters. Easy to read membrane type and pore size printed on every Millex™ filter. Over-molded design provides excellent seal integrity and burst strength.

PART OF THE DURAN® BOTTLE SYSTEM DURAN® BOTTLE CAPS

11 298 25 Syringe Filter (0.2 µm) with connector, non-sterile 0.2 µm filter and female Luer Slip to 5.8 mm male connector, with o-ring seal 2 11 298 29 Syringe Filter Connector only (without syringe filter), female Luer Slip to 5.8 mm male connector, with o-ring seal 2 11 527 52 40 mm ring gasket seal for GL 45 mulifunction caps. Circular

Low Cost Nylon Syringe Filters - Samples Available - Ships

Also note that nylon-66 syringe filters are often compatible. Contact us for advise. Sterile Nylon syringe filters are available as well. Hydrophilic Nylon is most ideal for aqueous (non-acidic) or organic sample prep. In addition, Nylon syringe filter for hplc , GC or dissolution trial analysis are among the most popular uses.

Syringe Filters for HPLC/HPLC Mobile Phase Filtration

PTFE Syringe Filters; PTFE Syringe Filters are universal filters that are inert to a wide variety of aggressive solvents and strong acids and bases. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. We offer PTFE syringe filters in both their hydrophobic and hydrophilic states.

Millex Syringe Filter Unit, Hydrophilic PTFE, Non-sterile

Millex Syringe Filter Unit, Hydrophilic PTFE, Non-sterile Replaces SLLGH13NL, 0.20 µm pore size, 13 mm diameter, Millex-LG hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.

EZFlow 13mm Hydrophobic PTFE Syringe Filter, 100/pack

The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore size. The filter membranes are reinforced with polypropylene housing with a female

Syringe Filters for Chromatography | Sigma-Aldrich

Millex ®-LH 0.45µm hydrophilic PTFE syringe filter, 13mm: SLLHC13NL: PTFE, hydrophilic: Millex ®-LH 0.20µm hydrophilic PTFE syringe filter, 13mm: SLLGC13NL: Anopore ® Whatman Anotop ® IC and LC syringe filter, Anotop ® 10 IC Syringe Filter, pore size 0.2 μm, polypropylene housing, WHA68099233: 10-100 mL: PTFE, hydrophilic

Nalgene® 13mm Syringe Filters, PTFE membrane, 0.45um, case/100

Science Supply Store offers Lab Supplies and Equipment, ECO Funnels, Nalgene Lab Bottles, Pharmacy Vials and Containers, Safety Storage Cabinets and Safety Cans

Kinesis PTFE, Hydrophilic Syringe Filters for UHPLC & HPLC

KX Syringe Filter, Hydrophilic PTFE 13mm 0.45µm Kinesis PTFE, Hydrophilic Syringe Filters for UHPLC & HPLC. Part No. ESF-PTH-13-045. Web Price $91.67 PK/100

Trace2 PTFE Membrane Syringe Filter, 13mm, 0.45μm, 100-pk

Trace2 PTFE Membrane, 13mm, 0.45μm (F2300-18)

Syringe Filter, PTFE, 0.2um, 13mm, 100/pk - Chrom Tech, Inc.

PTFE is hydrophobic and chemically resistant to all solvents, acids and bases. Does not impart extractables to the filtrate. PTFE blocks water vapor, making it ideal for transduce

Swinny Filter Holder 13 mm, stainless steel | XX300

•Durable stainless steel construction ensures years of use, decreasing waste from disposable syringe filters •Autoclavable with filter in place for sterile filtration Applications: Ultracleaning or Sterilization of Liquids XX300 Swinny Filter Holder 13 mm, stainless steel XX3002500 Microsyringe Filter Holder 25 mm, Luer-Lok, stainless steel

Syringe Filters for HPLC/HPLC Mobile Phase Filtration

PTFE Syringe Filters; PTFE Syringe Filters are universal filters that are inert to a wide variety of aggressive solvents and strong acids and bases. These syringe filters can also be exposed to high temperatures and are an excellent choice for HPLC sample preparation. We offer PTFE syringe filters in both their hydrophobic and hydrophilic states.

Membrane Solution :: Syringe Filter - 4 MM

Membrane is available in Nylon, PTFE, PVDF and so on. Pure raw material eliminates extractables to ensure excellent results. By mature manufacturing skills, 4mm diameter syringe filters are produced with high quality and cost-effectiveness in 100000 clean room under strict QC and QA procedures.

Captiva Syringe Filters | Aijiren

Captiva syringe filters are typically used to prepare small-volume samples for HPLC and ion chromatography. They allow for high flowrates and loading volumes, and also extend column lifetimes considerably. Find out more here.

China 25mm PTFE Syringe Filter for Venting and Gas Filtration

Syringe Filter, Filter Membrane, PTFE Syringe Filter manufacturer / supplier in China, offering 25mm PTFE Syringe Filter for Venting and Gas Filtration, Microporous Sterile Nylon Membrane Filter in Roll, Hydrophilic Mce 0.2um 25mm Syringe Filter for Hospital and Lab Supplier and so on.

Swinny Filter Holder 13 mm, stainless steel | XX300

•Durable stainless steel construction ensures years of use, decreasing waste from disposable syringe filters •Autoclavable with filter in place for sterile filtration Applications: Ultracleaning or Sterilization of Liquids XX300 Swinny Filter Holder 13 mm, stainless steel XX3002500 Microsyringe Filter Holder 25 mm, Luer-Lok, stainless steel

Advantec 13JP050AN Syringe Filters, 0.5 um Hydrophobic PTFE

Description Syringe Filters, 0.5 um Hydrophobic PTFE, 13 mm; 100/Pk Key Features Non-pigmented acrylic or polypropylene (PP) housings feature integral filter sealing to avoid the risk of contamination from pigments and adhesives

Ptfe membrane Manufacturers & Suppliers, China ptfe membrane

ptfe membrane manufacturer/supplier, China ptfe membrane manufacturer & factory list, find qualified Chinese ptfe membrane manufacturers, suppliers, factories, exporters & wholesalers quickly on Made-in-China.com., page 3

100pcs PTFE Syringe Filter 13mm 25mm Diameter, 0.45 um 0.22

100x Nylon66 Syringe Filter 13mm 25mm Diameter, 0.45 um 0.22 um Pore Size, HPLC

Syringe Filter - syringe filters Suppliers, Syringe Filter

Syringe filters are a cost-effective way to improve the quality of HPLC analysis, improve consistency, extend column life and reduce maintenance. By removing particulates before the sample enters the column, Navigator syringe filters allow unimpeded flow. Without particulates to more

Syringe Filters | Life Science Research | MilliporeSigma

Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.

China 0.45um PTFE 25mm Sterile Syringe Filter for HPLC

0.22um Syringe Filter, Mce Syringe Filter, PP Syringe Filter manufacturer / supplier in China, offering 0.45um PTFE 25mm Sterile Syringe Filter for HPLC, High Pressure Resistance Series Capsule Filter for Inkjet Inks Filtration, 0.22 Micro 1/4′′npt Small Capsule Filter and so on.

Antibodies & Protein Biology - Fisher Sci

This 13 mm syringe filter with a hydrophilic PTFE membrane, for non-sterile filtration, has a 0.45 μm pore size used in low protein binding clarification of aqueous & organic solutions. (1) This 25 mm syringe filter with a graduated glass fiber & nylon membrane, for non-sterile filtration, has a 0.45 μm pore size used in clarifying of aqueous

0.45 Micron Syringe Filters - Samples Available - Ships Next

Polypropylene Syringe Filters, 0.45 um, 13mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF14705 Regular Price: $72.84 Price $64.39

MilliporeSigma 13mm Nonsterile Millex Syringe Filters

Description. Hydrophobic PTFE membranes have excellent solvent resistance and are ideal for HPLC sample preparation; Overmolded polypropylene housing design provides a more robust filter, with a maximum housing pressure of 150psig (10 bar) enabling solutions to be filtered faster

Laboratory Filtration Solutions and Equipment | Sterlitech

Our range of membrane, syringe, and capsule filters represent the industry’s highest quality manufacturing standards, product performance, and application support for laboratory-scale filtration. Reduce process times, increase analytical efficiency and produce consistent, measurable results today with our filtration devices.