with 13mm 33mm hplc syringe filter

Nalgene™ Syringe Filters, Non-sterile

Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.

Choice™ PVDF (Hydrophilic) Syringe Filters

Specifications Membrane: HPLC certified PVDF Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Applications HPLC and organic-solvent sample preparation and clean-up Protein-based samples with high non-specific binding Environmental water samples

Millex® Syringe Filters | Life Science Research | MilliporeSigma

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.

Nylon Syringe Filters - Pall Corporation

Nylon syringe filters can be used for both aqueous and solvent-based sample filtration applications. They have excellent chemical compatibility with esters, bases and alcohols. Nylon syringe filters have been widely used to protect HPLC systems and columns from particulate contamination. Overview Order Products Description Documents Applications

Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

Our HPLC syringe filters have been designed to minimize the buildup of particles during analysis. This helps minimize the possibility of instrument failure or shutdown while also maximizing your uptime.

Syringe Filters | Thermo Fisher Scientific - US

Titan3 Premium Syringe Filters Target2 Routine Syringe Filters Choice Basic Syringe Filters; Range of filter sizes: 4mm to 30mm: 4mm to 30mm: 13mm to 25mm: High-quality filtration solutions : Low extractable membranes and housing : Plain polypropylene housing : HPLC performance tested : Enhanced Luer Lock inlet which provides secure attachment

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

HPLC Syringe Filter - Hplc Vials

Non-sterile Disposable Syringe Filter Syringe Filter PTFE for HPLC Syringe Filter Nylon for Laboratory 13mm, 25mm or 33mm 4.House Material: PP ...

Luer Lock Filter at Thomas Scientific

Manufactured from polypropylene. Ideal for addition and withdrawal of contents via syringe. 45mm cap has 33mm hole to accommodate 45mm septa or 45mm port assembly. 32mm cap has 20mm hole to accommodate 32mm septa or 32mm port assembly. Size: 32mm & 45mm O-ring seal Male luer lock. Compare this item.

Non-Sterile Syringe Filters - Pall Corporation

Pall supplies a range of non sterile syringe filters that can be used across a range of sample preparation applications. Pall’s Acrodisc® syringe filters can be used for prefiltation, general filtration and in critical analytical sample preparation applications.

Whatman SPARTAN Syringe Filters certified for HPLC sample

SPARTAN HPLC Syringe Filter, 13 mm, regenerated cellulose, 0.2 µm (100 pcs) 13 mm: 0.2 µm: Male luer: 100 pieces: 299.00 USD : Add to cart {{stock.stockMessage

Acrodisc Syringe Filters - Pall

25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.

Acrodisc® Syringe Filters, 13 mm, Pall Laboratory | VWR

These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available. Available in 0.2 µm for UHPLC applications. Available with prefilter for difficult to filter samples. Color coded for easy identification.

Choice™ Regenerated Cellulose Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice Regnerated Cellulose Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice Regnerated Cellulose Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice Regnerated Cellulose Syringe Filters 0.2 µm, 13 mm, 100 Pk.

Acrodisc® 13 mm Syringe Filter, 0.45 µm PVDF Membrane

13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Hydrophilic polyvinylidene fluoride (PVDF) Hold-Up Volume <14 µL Housing Material polypropylene Maximum Operating Pressure (bar) 3.5 bar Maximum Operating Temperature (Metric) 55 °C Typical Flow Rate 15 mL/min at 3.1 bar (310 kPa, 45 psi) Others Also Bought

Luer Lock Filter at Thomas Scientific

Manufactured from polypropylene. Ideal for addition and withdrawal of contents via syringe. 45mm cap has 33mm hole to accommodate 45mm septa or 45mm port assembly. 32mm cap has 20mm hole to accommodate 32mm septa or 32mm port assembly. Size: 32mm & 45mm O-ring seal Male luer lock. Compare this item.

Nylon Syringe Filters - Pall Corporation

Nylon syringe filters can be used for both aqueous and solvent-based sample filtration applications. They have excellent chemical compatibility with esters, bases and alcohols. Nylon syringe filters have been widely used to protect HPLC systems and columns from particulate contamination. Overview Order Products Description Documents Applications

Acrodisc® Syringe Filters, 13 mm, Pall Laboratory | VWR

These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available. Available in 0.2 µm for UHPLC applications. Available with prefilter for difficult to filter samples. Color coded for easy identification.

Millex® Syringe Filters | Life Science Research | MilliporeSigma

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.

Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

Our HPLC syringe filters have been designed to minimize the buildup of particles during analysis. This helps minimize the possibility of instrument failure or shutdown while also maximizing your uptime.

Choice™ Regenerated Cellulose Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice Regnerated Cellulose Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice Regnerated Cellulose Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice Regnerated Cellulose Syringe Filters 0.2 µm, 13 mm, 100 Pk.

Whatman SPARTAN Syringe Filters certified for HPLC sample

SPARTAN HPLC Syringe Filter, 13 mm, regenerated cellulose, 0.2 µm (100 pcs) 13 mm: 0.2 µm: Male luer: 100 pieces: 299.00 USD : Add to cart {{stock.stockMessage

Millex Syringe Filter, hydrophilic PTFE - Sigma-Aldrich

Millex Syringe Filter Unit, PTFE, Hydrophilic, Non-sterile Replaces SLCR013NL & Z227420, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane View Price and Availability Millipore SLGV033N Millex Syringe Filter, Durapore®( PVDF ), Non-sterile 0.22 µm pore size, 33 mm diameter, Millex-GV Durapore®( PVDF ) membrane, hydrophilic

Acrodisc Syringe Filters - Pall

25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.

Whatman® ReZist® syringe filter 13 mm, pore size 0.2 μm, PTFE

These filters are ideal for the clarification of aggressive organic solvents. ReZist 30 mm filters can also be used as a venting filter for small vessels. ReZist for HPLC sample preparation features. Hydrophobic PTFE membrane is laminated with polypropylene. 13 mm diameter with Mini-Tip.

Syringe Filters | Thermo Fisher Scientific - US

Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.

Nalgene™ Syringe Filters, Non-sterile

Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.

Millex® Syringe Filters - Sigma-Aldrich

MILLEX ® - GV Syringe Filter, 0.22 μm Hydrophilic PVDF, 13 mm, Sterile Expand SLGPM33RS Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. Expand SLGV004SL

Syringe Filters - Sigma-Aldrich

SLGPM33RS. Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. 0.22 μm pore size.

Choice™ PVDF (Hydrophilic) Syringe Filters

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.45 µm, 25 mm, 100 Pk. Choice PVDF (Hydrophillic) Syringe Filters 0.2 µm, 13 mm, 100 Pk.

HPLC Syringe Filter - Hplc Vials

Non-sterile Disposable Syringe Filter Syringe Filter PTFE for HPLC Syringe Filter Nylon for Laboratory 13mm, 25mm or 33mm 4.House Material: PP ...

Millex® Syringe Filters - Sigma-Aldrich

MILLEX ® - GV Syringe Filter, 0.22 μm Hydrophilic PVDF, 13 mm, Sterile Expand SLGPM33RS Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. Expand SLGV004SL

Nalgene™ Syringe Filters, Non-sterile

Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.

Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

Our HPLC syringe filters have been designed to minimize the buildup of particles during analysis. This helps minimize the possibility of instrument failure or shutdown while also maximizing your uptime.

Syringe Filters | Thermo Fisher Scientific - US

Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Nylon Syringe Filters - Pall Corporation

Nylon syringe filters can be used for both aqueous and solvent-based sample filtration applications. They have excellent chemical compatibility with esters, bases and alcohols. Nylon syringe filters have been widely used to protect HPLC systems and columns from particulate contamination. Overview Order Products Description Documents Applications

Luer Lock Filter at Thomas Scientific

Manufactured from polypropylene. Ideal for addition and withdrawal of contents via syringe. 45mm cap has 33mm hole to accommodate 45mm septa or 45mm port assembly. 32mm cap has 20mm hole to accommodate 32mm septa or 32mm port assembly. Size: 32mm & 45mm O-ring seal Male luer lock. Compare this item.

Non-Sterile Syringe Filters - Pall Corporation

Pall supplies a range of non sterile syringe filters that can be used across a range of sample preparation applications. Pall’s Acrodisc® syringe filters can be used for prefiltation, general filtration and in critical analytical sample preparation applications.

Acrodisc® Syringe Filters, 13 mm, Pall Laboratory | VWR

These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available. Available in 0.2 µm for UHPLC applications. Available with prefilter for difficult to filter samples. Color coded for easy identification.

Acrodisc® 13 mm Syringe Filter, 0.45 µm PVDF Membrane

13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Hydrophilic polyvinylidene fluoride (PVDF) Hold-Up Volume <14 µL Housing Material polypropylene Maximum Operating Pressure (bar) 3.5 bar Maximum Operating Temperature (Metric) 55 °C Typical Flow Rate 15 mL/min at 3.1 bar (310 kPa, 45 psi) Others Also Bought

Millex® Syringe Filters | Life Science Research | MilliporeSigma

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.

Acrodisc Syringe Filters - Pall

25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.

Millex Syringe Filter, hydrophilic PTFE - Sigma-Aldrich

Millex Syringe Filter Unit, PTFE, Hydrophilic, Non-sterile Replaces SLCR013NL & Z227420, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane View Price and Availability Millipore SLGV033N Millex Syringe Filter, Durapore®( PVDF ), Non-sterile 0.22 µm pore size, 33 mm diameter, Millex-GV Durapore®( PVDF ) membrane, hydrophilic

Syringe Filters - Sigma-Aldrich

SLGPM33RS. Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. 0.22 μm pore size.

Millex® Syringe Filters | Life Science Research | MilliporeSigma

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.

Choice™ PVDF (Hydrophilic) Syringe Filters

Specifications Membrane: HPLC certified PVDF Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Applications HPLC and organic-solvent sample preparation and clean-up Protein-based samples with high non-specific binding Environmental water samples

Syringe Filters – Glass, PTFE, PES, PP, Nylon, & More

Our HPLC syringe filters have been designed to minimize the buildup of particles during analysis. This helps minimize the possibility of instrument failure or shutdown while also maximizing your uptime.

Acrodisc Syringe Filters - Pall

25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.

Acrodisc® Syringe Filters, 13 mm, Pall Laboratory | VWR

These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available. Available in 0.2 µm for UHPLC applications. Available with prefilter for difficult to filter samples. Color coded for easy identification.

Acrodisc® 13 mm Syringe Filter, 0.2 µm PTFE Minispike Outlet

13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

with 13mm hplc syringe filters-HPLC Filter

Syringe Filter: 13 mm Membrane Dia., 0.45 um Pore Size, 100 PK. Use for filtering and de-gassing chromatography solvents or filtering viscous organic-based HPLC samples. They are also ideal for aerosol sampling and can be 13mm Syringe Filter – Membrane Solutions. Membrane Solutions’ 13mm syringe filters have two types: ultrasonic welding

Syringe Filters | Thermo Fisher Scientific - US

Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.

Titan3™ Nylon Syringe Filters - Thermo Fisher Scientific

Technical Support Customer Service Offering low extractable membranes and housing, Thermo Scientific™ Titan3™ Nylon Syringe Filters are HPLC performance tested, and color-coded to easily select the correct membrane and pore size. An enhanced Luer Lock inlet prevents leakage.

How to Select a Syringe Filter and How to Use it? (2020 Guide)

Feb 17, 2020 · 13 mm Syringe Filters For sample volumes <10 mL range; Ideal choice for most applications; Holdup (dead) volume is <15 ul. Female inlet luer lock Maximum operation pressure <15 bar Bubble point: Hydrophilic 2-3 bar; Hydrophobic 1-1.2 bar 25 mm Syringe Filters For sample volumes <100 mL range; Holdup (dead) volume is <125 ul. Female inlet luer lock

Millex Syringe Filter, hydrophilic PTFE - Sigma-Aldrich

Millex Syringe Filter Unit, PTFE, Hydrophilic, Non-sterile Replaces SLCR013NL & Z227420, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane View Price and Availability Millipore SLGV033N Millex Syringe Filter, Durapore®( PVDF ), Non-sterile 0.22 µm pore size, 33 mm diameter, Millex-GV Durapore®( PVDF ) membrane, hydrophilic

Acrodisc® Syringe Filters

4450 Acrodisc LC PVDF Minispike, 0.2 µm, 13 mm 100/300 4455 Acrodisc LC PVDF, 0.2 µm, 13 mm 100/300 4452 Acrodisc LC PVDF Minispike, 0.45 µm, 13 mm 100/300 4457 Acrodisc LC PVDF, 0.45 µm, 13 mm 100/300 4406 Acrodisc LC PVDF, 0.2 µm, 25 mm 50/200 4408 Acrodisc LC PVDF, 0.45 µm, 25 mm 50/200 Ion Chromatography Certification

Syringe Filters - Sigma-Aldrich

SLGPM33RS. Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. 0.22 μm pore size.

Nalgene™ Syringe Filters, Non-sterile

Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.

Non-Sterile Syringe Filters - Pall Corporation

Pall supplies a range of non sterile syringe filters that can be used across a range of sample preparation applications. Pall’s Acrodisc® syringe filters can be used for prefiltation, general filtration and in critical analytical sample preparation applications.

13 Mm Syringe Filter at Thomas Scientific

Red PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 13 mm PerkinElmer Hydrophobic PTFE syringe filters have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.

with 13mm hplc syringe filters-HPLC Filter

Syringe Filter: 13 mm Membrane Dia., 0.45 um Pore Size, 100 PK. Use for filtering and de-gassing chromatography solvents or filtering viscous organic-based HPLC samples. They are also ideal for aerosol sampling and can be 13mm Syringe Filter – Membrane Solutions. Membrane Solutions’ 13mm syringe filters have two types: ultrasonic welding

Choice™ PVDF (Hydrophilic) Syringe Filters

Specifications Membrane: HPLC certified PVDF Maximum operating temperature: 100 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Applications HPLC and organic-solvent sample preparation and clean-up Protein-based samples with high non-specific binding Environmental water samples

Acrodisc Syringe Filters - Pall

25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.

Syringe filters | Sigma-Aldrich

0.2 μm. 33 mm. PTFE membrane (Millex-FH hydrophobic) polypropylene housing (Color Code: Red) Expand. Hide. SLFG02550. 0.2 μm pore size.

Syringe Filters - Sigma-Aldrich

SLGPM33RS. Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. 0.22 μm pore size.

Acrodisc® Syringe Filters, 13 mm, Pall Laboratory | VWR

These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available. Available in 0.2 µm for UHPLC applications. Available with prefilter for difficult to filter samples. Color coded for easy identification.

Acrodisc® Syringe Filters

4450 Acrodisc LC PVDF Minispike, 0.2 µm, 13 mm 100/300 4455 Acrodisc LC PVDF, 0.2 µm, 13 mm 100/300 4452 Acrodisc LC PVDF Minispike, 0.45 µm, 13 mm 100/300 4457 Acrodisc LC PVDF, 0.45 µm, 13 mm 100/300 4406 Acrodisc LC PVDF, 0.2 µm, 25 mm 50/200 4408 Acrodisc LC PVDF, 0.45 µm, 25 mm 50/200 Ion Chromatography Certification

Choosing the Best Syringe Filters for Biological Sample

Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120

Syringe Filters | Thermo Fisher Scientific - US

Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.

Whatman SPARTAN Syringe Filters certified for HPLC sample

SPARTAN HPLC Syringe Filter, 13 mm, regenerated cellulose, 0.2 µm (100 pcs) 13 mm: 0.2 µm: Male luer: 100 pieces: 299.00 USD : Add to cart {{stock.stockMessage

Millex Syringe Filter, hydrophilic PTFE - Sigma-Aldrich

Millex Syringe Filter Unit, PTFE, Hydrophilic, Non-sterile Replaces SLCR013NL & Z227420, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane View Price and Availability Millipore SLGV033N Millex Syringe Filter, Durapore®( PVDF ), Non-sterile 0.22 µm pore size, 33 mm diameter, Millex-GV Durapore®( PVDF ) membrane, hydrophilic

Labfil membrane 13mm hplc syringe filters-HPLC Filter

Membrane Solutions’ 13mm syringe filters have two types: ultrasonic welding and color-coding housings. The classic range is available in all of the major Syringe Filter – Aijiren syringe filter 0.22um/0.45um for hplc different customers’ request, LABFIL supply the syringe filters with outer ring as well. Size: 13mm/25mm/33mm. labfil

Millex® Syringe Filters | Life Science Research | MilliporeSigma

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.